ShopwoodPlans

Jobsite table saws · Comparison

DeWalt DWE7485 vs SKIL TS6307 table saw

The short answer

Want a 10 in blade and a stand in the box? SKIL

Want compact with a blade brake? DeWalt

Both are 15 A jobsite saws with rack and pinion fences and about two feet of rip to the right. The SKIL TS6307 runs a 10 in blade and comes on its own folding stand. The DeWalt DWE7485 is a compact 8-1/4 in benchtop saw with a blade brake and power-loss reset.

Best for a full-size blade

Pick the SKIL TS6307-00 if

Full SKIL TS6307-00 review

  • You want a 10 in blade and a deeper cut: SKIL lists 3-1/2 in at 90° vs DeWalt’s 2-9/16 in.
  • You want a folding stand in the box.
  • You want rip to the left as well: 14 in left, 25.5 in right.
Check the SKIL TS6307 on Amazon

Best for a compact saw with a blade brake

Pick the DeWalt DWE7485 if

Full DeWalt DWE7485 review

  • You want a blade brake and power-loss reset.
  • You want a compact benchtop saw in a metal roll cage that sets on your own bench or stand.
  • You want DeWalt’s 3-year warranty with 1 year of free service.
Check the DeWalt DWE7485 on Amazon

Before you buy: Both listings were sold by Amazon when checked on Oct 16, 2026. The DeWalt has no stand in the box. Check the seller and that the item is new before you order.

As an Amazon Associate I earn from qualifying purchases.

Which is better at what

3SKIL TS6307
spec rows won
1DeWalt DWE7485
spec rows won
4even or
unclear

This counts the rows below where one is clearly better. It’s a tally, not a rating.

SKIL wins 3: blade size, depth of cut, and stand. DeWalt wins 1: safety features. The rest are even or not directly comparable. A green check means a gap of more than 5% or a feature only one has. Every figure comes from the makers, not Amazon.

SKIL TS6307DeWalt DWE7485
Motor15 A, 4,600 rpm15 A, 5,800 rpm
Blade10 in, 24T carbide, 5/8 in arbor8-1/4 in (included)
Depth of cut3-1/2 in at 90° (0° bevel); 2-1/2 in at 45°2-9/16 in at 0°; 1-3/4 in at 45°
Rip to the right25.5 in24.5 in
FenceRack and pinion railsRack and pinion telescoping rails
StandIntegrated folding standNone (compact benchtop, metal roll cage)
SafetyAnti-restart switch, guard, riving knife, anti-kickbackBlade brake, power-loss reset, modular guard, riving knife, anti-kickback pawls
In the boxStand, blade, guard, fence, miter gauge, push stick, riving knifeBlade, fence, guard, miter gauge, push stick, riving knife
Spec notes
  • Depth of cut: SKIL’s product page lists 3.5 in at 0° bevel and 2.5 in at 45° (and a 4x4 cutting-capacity claim at 90°). DeWalt’s official manual N865128 lists 2-9/16 in at 0° and 1-3/4 in at 45°.
  • Rip: DeWalt gives 24.5 in in its feature list and manual (one data field on its page says 24.0 in). The gap to the SKIL’s 25.5 in is about 4%, so it isn’t checked.
  • Motor rpm isn’t scored because the blades are different sizes.
  • Left out because one maker doesn’t list it on the pages we used: DeWalt bevel, dado and table size; SKIL weight and warranty. SKIL does list table size (25 x 24 in) on its product page; DeWalt lists 19 x 19 in in the manual. Those aren’t compared here.
  • The SKIL’s dado insert (STA6307) is sold separately.

The verdict

The SKIL TS6307 wins 3 rows to 1 and is the pick for most people setting up a first table saw: it cuts deeper (3-1/2 in at 90° vs 2-9/16 in) and it stands on its own. Pick the DeWalt DWE7485 if you want a blade brake and a compact saw you can carry to a bench.

As an Amazon Associate I earn from qualifying purchases.

By Mike E. · Specs checked October 16, 2026 · Based on manufacturer specs. Not tested hands-on.