ShopwoodPlans

12 in sliding miter saws · Comparison

DeWalt DWS779 vs DWS780 miter saw

The short answer

Want an LED shadow cutline? DWS780

Happy marking cuts the usual way? DWS779

These are near twins: same 15 A, 3,800 rpm motor, same 12 in blade, the same 2x14 crosscut at 90° and 2x10 at 45°, and the same crown and baseboard capacities. DeWalt names one main difference: the DWS780 has the XPS cutline, an LED that casts the blade’s shadow onto your mark.

Best for fast, accurate lineup

Pick the DeWalt DWS780 if

Full DeWalt DWS780 review

  • You want the XPS LED shadow cutline to line up cuts without a laser to adjust.
  • DeWalt lists its miter range: 60° right, 50° left.
Check the DeWalt DWS780 on Amazon

Seller check: when checked on Oct 16 this listing was sold by Amazon, but it also groups the DWS716 as a variant. Make sure the page you land on says DWS780 before you order.

Best if you don’t need the light

Pick the DeWalt DWS779 if

  • You want the same cut capacities and motor without the XPS light.
  • You mark and line up cuts by eye and blade.
Check the DeWalt DWS779 on Amazon

Seller check: when checked on Oct 16 this listing was sold by a third-party seller, not Amazon. Check the seller and that it’s new before you order.

Before you buy: The two Amazon listings need checking: the DWS779 is sold by a third party, and the DWS780 listing also includes the DWS716. Confirm the model number and seller before you order.

As an Amazon Associate I earn from qualifying purchases.

Which is better at what

2DeWalt DWS780
spec rows won
0DeWalt DWS779
spec rows won
9even or
unclear

This counts the rows below where one is clearly better. It’s a tally, not a rating.

DWS780 wins 2: the cutline and weight. The rest are the same, or too close to call. A green check means a gap of more than 5% or a feature only one has. Every figure comes from the makers, not Amazon.

DeWalt DWS780DeWalt DWS779
Motor15 A, 3,800 rpm; 1,600 W (US manual N466020)15 A, 3,800 rpm
Blade12 in carbide12 in carbide
CutlineXPS LED shadow cutlineNot listed
Positive miter stops1010
Crosscut2x14 at 90°, 2x10 at 45°2x14 at 90°, 2x10 at 45°
Bevel49° left and right (manual N466020)0-48° left and right
Crown nested / base vertical7-1/2 in / 6-3/4 in7-1/2 in / 6-3/4 in
Dust collectionOver 75% captured (DeWalt claim)Over 75% captured (DeWalt claim)
Weight56 lb (DeWalt support ticket 16483389, Oct 30 2026)67.5 lb (DeWalt product page data)
In the boxSaw, blade, wrench, dust bag, material clampSaw, blade, wrench, dust bag, material clamp
Warranty3-yr limited, 1-yr free service, 90-day3-yr limited, 1-yr free service, 90-day
Spec notes
  • Power: DeWalt’s US manual N466020 lists 1,600 W for the DWS780. We found no US wattage for the DWS779, so it isn’t compared.
  • Weight: the DWS780’s 56 lb is from DeWalt support ticket 16483389, Oct 30 2026; the DWS779’s is the “Assembled Product Weight” in the data on DeWalt’s product page (checked Oct 23, 2026). The DWS780 is 17% lighter, so it gets the check.
  • Miter range: DeWalt lists 60° right and 50° left for the DWS780, but no range on the DWS779 page, so it isn’t scored.
  • Bevel: the DWS780 manual (N466020) gives 49° left and right; DeWalt’s DWS779 page lists 0-48° left and right. The 1° gap is about 2%, under the 5% line, so it’s even.
  • Don’t need a sliding saw? The non-sliding 12 in models are compared in DeWalt DWS715 vs DWS716.

The verdict

The DWS780 wins 2 rows to 0 and is the pick: it adds the XPS cutline, and DeWalt’s data lists it 11.5 lb lighter. Everything that decides what you can cut is the same. If you don’t care about the light, the DWS779 cuts the same boards. Check the Amazon seller and model number on both listings first.

Get the DeWalt DWS780

Check the DeWalt DWS780 on Amazon

Seller check: when checked on Oct 16 this listing was sold by Amazon, but it also groups the DWS716 as a variant. Make sure the page you land on says DWS780 before you order.

Get the DeWalt DWS779

Check the DeWalt DWS779 on Amazon

Seller check: when checked on Oct 16 this listing was sold by a third-party seller, not Amazon. Check the seller and that it’s new before you order.

As an Amazon Associate I earn from qualifying purchases.

By Mike E. · Specs checked October 16, 2026 (weight and bevel October 23, 2026) · Based on manufacturer specs. Not tested hands-on.