ShopwoodPlans

12 in compound miter saws · Comparison

DeWalt DWS715 vs DWS716 miter saw

The short answer

Want to bevel both ways? DWS716

Only bevel to the left? DWS715

Both are 12 in non-sliding compound miter saws with a 15 A motor, a carbide blade, 14 positive miter stops on a stainless detent plate and the same 3-year warranty. The main difference is the bevel: the DWS715 tilts left only (0-48°, plus 3° right), while the DWS716 tilts 0-48° both ways, so you can flip the bevel without flipping the board.

Best for bevel cuts both ways

Pick the DeWalt DWS716 if

Full DeWalt DWS716 review

  • You cut crown, trim or compound angles and want to bevel left and right: 0-48° both ways, with stops at 0, 22.5, 33.9 and 45°.
  • You want taller base capacity: 6-1/2 in vertical against 5-1/2 in.
  • You want the high-efficiency dust duct as well as the bag.
Check the DeWalt DWS716 on Amazon

Sold by Amazon.com when checked on Oct 16, 2026.

Best if left-only bevel is enough

Pick the DeWalt DWS715 if

Full DeWalt DWS715 review

  • You mostly make square and miter cuts and rarely bevel to the right.
  • You want the same motor class, blade, detent plate and warranty in the simpler saw.
  • DeWalt lists its crosscut: 2x8 at 90°, 2x6 at 45°.
Check the DeWalt DWS715 on Amazon

Sold by Amazon.com when checked on Oct 16, 2026. Use this listing, not the alternate DWS715 listing.

Before you buy: Both listings were sold by Amazon.com when checked on Oct 16, 2026. Amazon’s DWS715 page lists 4,500 rpm, 80 teeth and a brushless motor; DeWalt says 4,000 rpm and brushed, which is what this page uses. Check the model number before you order.

As an Amazon Associate I earn from qualifying purchases.

Which is better at what

3DeWalt DWS716
spec rows won
0DeWalt DWS715
spec rows won
6even or
unclear

This counts the rows below where one is clearly better. It’s a tally, not a rating.

DWS716 wins 3: bevel, base capacity and dust. The rest are the same or not listed for both. A green check means a gap of more than 5% or a feature only one has. Every figure comes from the makers, not Amazon.

DeWalt DWS716DeWalt DWS715
Motor15 A, 3,800 rpm15 A, 4,000 rpm (DeWalt lists it as brushed)
Bevel0-48° left and right; stops at 0, 22.5, 33.9, 45°0-48° left, 0-3° right
Miter0-50° left and right; 14 positive stops, cam lock with detent override14 positive stops; range not stated by DeWalt
Base vertical capacity6-1/2 in5-1/2 in (tall sliding fence)
Crown nested6-5/8 inNot on DeWalt’s page Amazon says 5-1/2 in
CrosscutNot on DeWalt’s page2x8 at 90°, 2x6 at 45°
Dust collectionHigh-efficiency dust duct and dust bagDust bag
In the box12 in carbide blade, wrench, dust bag, vertical clamp12 in carbide blade, wrench, dust bag, vertical clamp
Warranty3-yr limited, 1-yr free service, 90-day3-yr limited, 1-yr free service, 90-day
Spec notes
  • Weight is left out: DeWalt’s US page now lists 50.35 lb assembled for the DWS716 (its Canadian page says 41 lb), but we haven’t verified a DWS715 weight, so the two aren’t compared.
  • Motor speed isn’t scored. A 200 rpm difference isn’t a clear win either way.
  • Amazon’s DWS715 page says 4,500 rpm, 80 teeth and brushless; its own listing body and DeWalt say 4,000 rpm and brushed. DeWalt’s figures are used.
  • DWS715 crown capacity (5-1/2 in) appears only on Amazon, so it isn’t scored.
  • DWS716 crosscut capacity and DWS715 miter range in degrees aren’t on DeWalt’s pages.
  • Want a sliding saw for wider boards? See the DWS779 vs DWS780 comparison.

The verdict

The DWS716 wins 3 rows to 0 and is the pick. Bevelling both ways saves flipping long trim and crown, and it adds an inch of base capacity and a dust duct. If you mostly cut square and mitered ends and rarely bevel right, the DWS715 does the same basic job. Neither is a sliding saw; for wider boards, look at the DWS779 vs DWS780.

As an Amazon Associate I earn from qualifying purchases.

By Mike E. · Specs checked October 16, 2026 · Based on manufacturer specs. Not tested hands-on.