Side-by-side specs are on the comparison pages below.
Full specs side by side: DeWalt DWS715 vs DWS716
12 in compound miter saws · Single-tool guide
Quick verdict
The DWS715 is a 12 in non-sliding compound miter saw with a 15 A motor that bevels left only. It’s a good fit for trim, decking and framing cuts when flipping the board for opposite bevels doesn’t bother you. It isn’t the saw for crown or boards wider than a 2x8.
Good fit
Look elsewhere
As an Amazon Associate I earn from qualifying purchases. Links on this page are Amazon affiliate links; buying through them doesn’t change what you pay.
DeWalt rates the DWS715 to crosscut a 2x8 at 90° and a 2x6 at 45°. Miter 50° left and right (manual), with 14 positive stops (dewalt.com); bevel 48° left and 3° right.
Manual cut capacities (p6): at 0° miter, 3-5/8 in high x 6-1/4 in wide, or 7-7/8 in wide x 2-5/16 in high. At 45° miter, 3-5/8 x 4-5/16 in, or 5-1/2 x 2-5/16 in. At 45° left bevel, 2-1/2 x 6-1/4 in, or 7-7/8 x 1-5/16 in. Base molding up to 1 in thick by 3-5/8 in high, standing against the fence. DeWalt doesn’t publish a nested crown figure for this saw.
What that means (our math from the official figures, not a maker claim): a 4x4 (3.5 in) fits under the 3-5/8 in height at 0° and 45° miter.
Static check: DeWalt rates the DWS715 to 2x8 at 90° and 2x6 at 45°.
Owner threads here come from web-search result snippets on Oct 22, 2026; Reddit blocked direct reads, so we didn’t open the threads in full. Small sample: a count means “this many of the threads that search returned”, not a failure rate. We didn’t check Amazon reviews for this tool.
Reported in 1 of 1 DWS715 owner thread our Oct 21, 2026 search returned (Reddit r/Dewalt; search snippet, small sample)
One owner reported quality-control issues on arrival. One thread isn’t a pattern. Separately, Amazon’s “Customers say” summary describes durability as mixed (Amazon’s summary, not our count).
Fix: Check square and use the DWS715 manual’s miter scale, 0° and 45° bevel stop and fence steps (p7–8, under Maintenance and care below). For breakage, use the 90-day money-back period or a warranty claim.
Avoid or spot it: Check square at 0° miter and 0° bevel on day one, inside the return window.
Length: 3-year limited warranty, 1-year free service contract and a 90-day money-back period (dewalt.com warranty page, read Oct 21, 2026). It covers the original end user only.
Who’s covered: DeWalt says the warranty applies only to tools bought from DeWalt or a DeWalt authorized seller, and it may reject claims for tools bought from unauthorized sellers, including unauthorized websites. DeWalt doesn’t name Amazon.com either way. If you’re unsure about a seller, DeWalt says to ask internetadmin@sbdinc.com.
Registration: not required, and nothing on DeWalt’s warranty page says it extends the term.
Not covered: normal wear, abuse, accessories, and repairs someone else attempted.
How to claim: 1) Find your receipt. DeWalt says proof of purchase showing when and where you bought it may be required, and a receipt is required for the 90-day refund. 2) Use DeWalt’s web request form at support.dewalt.com (DeWalt calls it the fastest route), call 1-800-433-9258, or take the tool to a DeWalt service center (dewalt.com/service-center). 3) Don’t open the tool yourself first; repairs by others are excluded.
From DeWalt DWS715 manual N743681 (Type 20, checked Oct 22, 2026). Page numbers are PDF pages. Unplug the saw before any adjustment.
Not linked yet: we haven’t verified retail listings for these parts.
Why: The stock blade dulls; a 60T or 80T blade gives cleaner trim cuts.
Who can skip it: Until the stock blade dulls.
Is it good? Not tallied.
Official or third-party: Either.
Will it fit? Must be 12 in (305 mm), rated at least 4,800 rpm, crosscut type with a hook angle of 7° or less; never a smaller diameter. The manual’s accessory page says to always use 1 in arbor holes, but its blade-change steps (p7) explain mounting a 5/8 in bore blade with the 1 in blade adapter removed. The manual disagrees with itself, so a 1 in arbor blade is the safe buy. Manual tooth table: 40T general, 60T and 80T fine crosscut, 96T non-ferrous (TCG).
No listing: blade part numbers aren’t verified yet.
Why: Holds crown for cutting.
Who can skip it: If you don’t cut crown.
Is it good? Not tallied.
Official or third-party: Official DeWalt.
Will it fit? Named in the DWS715 manual (p13).
Not linked yet.
Why: Clamp for small or repeat cuts; replacement bag.
Who can skip it: If you clamp by hand or run a vac.
Is it good? Not tallied.
Official or third-party: Official DeWalt.
Will it fit? Both named in the DWS715 manual (p13).
Not linked yet.
Why: A miter saw stand gives you a working height and long-board support.
Who can skip it: If the saw sits on a bench with support either side.
Is it good? Not tallied.
Official or third-party: Official DeWalt.
Will it fit? Named in the DWS715 manual (p13).
Amazon listings not confirmed yet.
As an Amazon Associate I earn from qualifying purchases. Links on this page are Amazon affiliate links; buying through them doesn’t change what you pay.
Side-by-side specs are on the comparison pages below.
Full specs side by side: DeWalt DWS715 vs DWS716
Only 0–3°. Full bevel (0–48°) is to the left.
DeWalt lists 2x8 at 90° and 2x6 at 45°.
DeWalt lists it as brushed, 4,000 rpm. Amazon’s listing says otherwise; sources disagree.
12 in, rated at least 4,800 rpm, crosscut type. The manual says to use 1 in arbor blades but also explains fitting 5/8 in bores with the adapter removed; a 1 in arbor blade is the safe choice.
50° left and right (manual), with 14 positive stops (dewalt.com).
No; the manual has no laser or cutline light.
The Type 20 manual (N743681) lists the DW7090 clamp, the DW7053 dust bag, the DW7084 crown fence and the DWX723, DWX724, DWX725B and DWX726 stands.
As an Amazon Associate I earn from qualifying purchases. Links on this page are Amazon affiliate links; buying through them doesn’t change what you pay.