ShopwoodPlans

Benchtop thickness planers · Comparison

DeWalt DW734 vs DW735 planer

The short answer

Fine finish, less snipe, better chip clearing? DW735

Narrower planer with long tables? DW734

Both planers use the same 15 A, 20,000 rpm motor and a 3-knife cutterhead, take boards up to 6 in thick and remove up to 0.13 in per pass. The DW735 adds a second feed speed (179 cuts per inch for finish passes), an automatic carriage lock against snipe, fan-assisted chip ejection and a much longer cord.

Best for finish quality

Pick the DeWalt DW735 if

Full DeWalt DW735 review

  • You want a finish speed: 179 cuts per inch as well as 96.
  • You want the carriage to lock itself to cut down snipe.
  • You want fan-assisted chip ejection with a hose adapter in the box.
Check the DeWalt DW735 on Amazon

Best for a narrower footprint

Pick the DeWalt DW734 if

  • You want a narrower machine: DeWalt lists it about 16.5 in wide vs 22 in.
  • You like long tables: 33-1/2 in of infeed and outfeed support.
  • One feed speed (96 cuts per inch) is all you need.
Check the DeWalt DW734 on Amazon

Before you buy: Both listings were sold by Amazon when checked on Oct 16, 2026. Listings change, so check the seller and that the item is new before you order.

As an Amazon Associate I earn from qualifying purchases.

Which is better at what

4DeWalt DW735
spec rows won
0DeWalt DW734
spec rows won
9even or
unclear

This counts the rows below where one is clearly better. It’s a tally, not a rating.

DW735 wins 4: feed speeds, snipe control, dust collection and cord length. The rest are even. A green check means a gap of more than 5% or a feature only one has. Every figure comes from the makers, not Amazon.

DeWalt DW735DeWalt DW734
Motor15 A, 120V, 20,000 rpm15 A, 120V, 20,000 rpm
Cutterhead3 knives, 10,000 rpm, reversible3 knives, 10,000 rpm, reversible
Feed speeds2-speed gearbox: 96 or 179 cuts per inch1 speed: 96 cuts per inch
Max width13 in12-1/2 in
Max thickness6 in6 in
Max cut per pass0.13 in0.13 in
Snipe controlAutomatic carriage lockFour-column carriage lock (manual)
Dust collectionFan-assisted chip ejection, hose adapter includedDust hood included, no fan assist listed
TablesFolding tables, 19-3/4 in cast aluminum baseInfeed/outfeed tables, 33-1/2 in total support
Depth stopTurret depth stop, removal gaugeTurret depth stop, removal gauge
Cord156 in72 in
Size (H x L x W)18.1 x 24.13 x 22.0 in20.48 x 23.38 x 16.52 in
Warranty3-yr limited, 1-yr free service, 90-day3-yr limited, 1-yr free service, 90-day
Spec notes
  • Max width differs by 1/2 in (about 4%), under the 5% line, so it isn’t checked.
  • Size is mixed: the DW734 is narrower and shorter but taller, so no check.
  • Weight is left out. DeWalt’s listed weights may be package weights, and a net tool weight wasn’t found.
  • Feed rate in feet per minute isn’t published for either.

The verdict

The DW735 wins 4 rows to 0 and is the pick. It shares the DW734’s motor, cutterhead and capacities, then adds the features that matter on finish passes: a slower 179-cuts-per-inch feed, an automatic carriage lock and fan-assisted chip clearing. Get the DW734 if a narrower machine with long fixed tables suits your shop and one feed speed is enough.

As an Amazon Associate I earn from qualifying purchases.

By Mike E. · Specs checked October 16, 2026 · Based on manufacturer specs. Not tested hands-on.