ShopwoodPlans

Benchtop thickness planers · Comparison

DeWalt DW735 vs Makita 2012NB planer (2026): benchtop thickness planers

The short answer

Two feed speeds, dust adapter included? DeWalt

Lighter, takes shorter boards? Makita

Both are corded 15 A benchtop thickness planers that plane stock about 6 in. thick, with a depth stop for repeat thicknesses and a feature to cut down snipe. The DW735 has three knives, two feed speeds and a dust hose adapter in the box. The Makita 2012NB has two knives and one feed speed, weighs about 30 lb less, and takes shorter boards.

Best for a dust collector

Pick the DeWalt DW735 if

Full DeWalt DW735 review

  • You have a dust collector. The dust hose adapter is in the box.
  • You want a finer finish setting. It has two feed speeds: 96 or 179 cuts per inch.
  • You want a carriage that locks itself. DeWalt says it cuts down snipe without a manual lock.

DW735 box: planer, dust hose adapter, crank handle, blade-change T-wrench. No stand.

Check the DeWalt planer on Amazon

Best for moving around

Pick the Makita 2012NB if

  • You move the planer around. Makita lists 61.9 lb.
  • You plane short pieces. Makita’s limit is its 5-1/16 in. feed-roller spacing.
  • You want a quieter planer. Makita lists 83 dB.

2012NB box: planer, a 2-pack of 12 in. blades, magnetic holder, blade wrench, key. Dust hood sold separately. No stand.

Check the Makita planer on Amazon

Before you buy: I compared the two planers on their own, without a stand. When I checked on Oct 9, 2026, the DeWalt listing was sold by Amazon and the Makita listing by a third-party seller with a delivery wait of over a week. Listings change, so check who the seller is and that it’s new before you order.

As an Amazon Associate I earn from qualifying purchases.

Key specs

2DeWalt DW735
spec rows won
2Makita 2012NB
spec rows won
8even or
unclear

This counts the rows below where one is clearly better. It’s a tally, not an overall rating. The DeWalt’s wins are about finish and dust. The Makita’s are about weight and short boards.

A green check means that number or feature is clearly better. No check means it's a tie, the gap is tiny, or the makers measure it differently. Every figure comes from DeWalt or Makita, not from Amazon.

DeWalt DW735Makita 2012NB
Max width13 in.12 in.
Max thickness6 in.6-3/32 in.
Max depth per pass1/8 in. (boards up to 6 in. wide)1/8 in. under 5-7/8 in. wide; 3/64 in. at 9-1/2–12 in.
Knives32 (double-edged)
Cutterhead speed10,000 rpm8,500 rpm
Feed speeds2: 96 or 179 cuts per inch1: 27.9 ft/min
Snipe controlAutomatic carriage lockInterna-Lok automated head clamp
Depth stopTurret depth stopAdjustable stopper
DustFan-assisted ejection; hose adapter includedOptional hood set
Shortest board12 in. manual safety ruleOver 5-1/16 in. feed-roller spacing
Weight as listed91.25 lb assembled product weight61.9 lb net weight
Warranty3 years plus 1 year free serviceNot confirmed
Spec notes
  • Width: DeWalt’s product page and manual list a 13 in. max width, but the manual’s safety rules also say never to plane material wider than 12 in. Because DeWalt’s own figures disagree, width isn’t scored.
  • Weight: DeWalt lists 91.25 lb as an assembled product weight. Makita’s product page lists 61.9 lb and its manual 59.5 lb. The gap is about 30 lb either way, so the row is scored.
  • Depth per pass: DeWalt only publishes its 1/8 in. max for boards up to 6 in. wide. Makita steps down as boards get wider. They can’t be compared on wide boards, so the row isn’t scored.
  • Warranty: I couldn’t confirm Makita’s warranty term from a Makita page, so warranty isn’t scored.

What it can handle

These are common planing jobs, checked against each maker’s published capacities and manuals. I haven’t tested either planer. If a job is past a published limit, it gets a CAN’T.

BoardDeWalt DW735Makita 2012NB
Board size
12" wide board Just barelyAt the 12 in. width in its manual’s safety rules. Just barelyExactly its 12 in. max width.
6" thick Just barelyExactly its 6 in. max. Can doUnder its 6-3/32 in. max.
Short board (10") Can’tManual: never plane boards under 12 in. long. Can doLonger than its 5-1/16 in. feed-roller spacing.
Passes
1/8" pass, 6" wide Just barelyIts 1/8 in. max is for boards up to 6 in. wide. Can’tOver 5-7/8 in. wide, its max is 1/16 in.
Two feed speeds Can do96 or 179 cuts per inch. Can’tOne feed rate, 27.9 ft/min.
Repeat thickness Can doTurret depth stop. Can doAdjustable stopper.
Dust
Dust collector Can doDust hose adapter included. Just barelyNeeds the optional hood set.
Shop vac Can’tDeWalt doesn’t recommend a shop vac. Just barelyOptional hood connects to a vacuum.

Capacities are the makers’ maximums. Take lighter passes on wide or hard boards.

Notes and sources

How the verdicts were made: capacities and limits come from each operator’s manual and product page. Nothing here comes from hands-on testing or owner reviews.

Width: there’s no 13 in. row. DeWalt lists 13 in. as the max width, but its manual’s safety rules say never to plane material wider than 12 in., so 12 in. is treated as the limit here.

Shop vac: DeWalt’s manual says it isn’t recommended to connect a shop vac to the DW735, because most vacs can’t keep up and the hose may clog. It recommends a dust collection system.

Sources:

  • DeWalt DW735 product page (features, box contents, weight, warranty): dewalt.com
  • DeWalt DW735 instruction manual (capacities, safety rules, dust collection): N486408_DW735_NA.pdf
  • Makita 2012NB product page (specs, box contents): makitatools.com
  • Makita 2012NB instruction manual (depth per pass, feed rollers, stopper, hood set): 2012NB manual PDF

Who should buy which

Get the DeWalt DW735 if:

  • You have a dust collector and want the adapter in the box.
  • You want a choice of feed speeds for a finer finish.
  • The planer will mostly stay in one spot.
Check the DeWalt planer on Amazon

Get the Makita 2012NB if:

  • You carry the planer to the bench or the jobsite.
  • You plane short pieces.
  • You’ll buy the hood set or don’t need dust pickup.
Check the Makita planer on Amazon

As an Amazon Associate I earn from qualifying purchases.

Skip it if

Skip the DeWalt DW735

if you have to lift the planer often or plane boards shorter than 12 in.

Skip the Makita 2012NB

if you want two feed speeds or dust pickup without buying an extra part.

Questions about this pair

Which planer is wider, the DW735 or 2012NB?

DeWalt lists 13 in. and Makita 12 in. But DeWalt’s own manual also says never to plane material wider than 12 in., so in practice treat both as 12 in. planers.

Can I use a shop vac?

DeWalt doesn’t recommend it for the DW735. Makita says its optional hood set connects the 2012NB to a vacuum cleaner.

Which is lighter?

The Makita. Makita lists 61.9 lb; DeWalt lists 91.25 lb.

Do they come with a stand?

No. Both listings here are the planer only.

Spec notes
  • Amazon listings compared: DeWalt DW735 (B0000CCXU8) and Makita 2012NB (B000051ZOO). Both are the planer only, without a stand or extra knives.

Specs checked October 9, 2026 against DeWalt's and Makita's own pages and manuals. Links are in "Notes and sources" under the chart above.

By Mike E. · Last checked October 9, 2026 · Based on manufacturer specs. Not tested hands-on.