ShopwoodPlans

Portable pocket-hole jigs · Comparison

Kreg 520PRO vs 320 pocket-hole jig (2026): built-in clamp or twist-apart guides?

The short answer

Built-in clamp, one-handed? 520PRO

Two guides, your own clamp? 320

Both are portable Kreg jigs that you bring to the work, with settings for 1/2, 3/4 and 1-1/2 in. stock and a lifetime warranty on the drill guides. The 520PRO clamps itself: you pump the handle to clamp and pull a trigger to release. The 320 has two drill guides that twist apart for variable hole spacing, but it has no clamp of its own. Kreg says to secure it with a clamp, and includes an adapter for one.

Best for one-handed clamping

Pick the Kreg Pocket-Hole Jig 520PRO if

  • You don’t own a spare clamp. The 520PRO clamps itself with a pump handle.
  • You drill in awkward spots. The handle rotates 360° and Kreg says it works in almost any orientation.
  • You want more screws to start: 60 vs 40.

520PRO box: jig, Easy-Set drill bit, stop collar, material thickness gauge, 6 in. #2 driver bit, 60 screws.

Check the Kreg 520PRO on Amazon

Best for adjustable spacing

Pick the Kreg Pocket-Hole Jig 320 if

  • You want to set your own hole spacing. The two drill guides twist apart.
  • You already own a clamp. The 320 includes an adapter for one.
  • You want a carrying case. It comes with one.

320 box: two drill guides with thickness stops, drill guide spacer, Easy-Set drill bit and stop collar, thickness gauge/hex wrench, 6 in. square-drive bit, carrying case, 40 screws. No clamp.

Check the Kreg 320 on Amazon

Before you buy: I compared the 520PRO (KPHJ520PRO2) with the plain 320 (KPHJ320), not the bundle that adds a face clamp. When I checked on Oct 9, 2026, both listings were sold by third-party sellers, not Amazon. Listings change, so check who the seller is and that it’s new before you order.

As an Amazon Associate I earn from qualifying purchases.

Key specs

2Kreg 520PRO
spec rows won
3Kreg 320
spec rows won
5even or
unclear

This counts the rows below where one is clearly better. It’s a tally, not an overall rating. If you don’t own a clamp yet, the 520PRO’s built-in clamp is the row that matters most.

A green check means that number or feature is clearly better. No check means it's a tie, the gap is tiny, or the makers measure it differently. Every figure comes from Kreg, not from Amazon.

Kreg 520PROKreg 320
ClampingBuilt-in VersaGrip pump clamp reverse-trigger releaseNone; clamp sold separately includes clamp pad adapter
Thickness settings1/2, 3/4, 1-1/2 in.1/2, 3/4, 1-1/2 in.
Variable hole spacingNot listedYes, two twist-apart guides
HandleRotates 360°Not listed
Repair useNot listedRemovable thickness stops for repairs
Screws included6040
Driver bit6 in. #26 in. square-drive
Carrying caseNot listedIncluded
Docking stationReady (sold separately)Not listed
WarrantyLifetime on drill guidesLifetime on drill guides
Spec notes
  • Clamp: Kreg’s 320 manual says not to hold the jig by hand while drilling and to secure it to the workpiece with a clamp. No clamp comes with the plain 320.
  • Hole placement: Kreg’s 320 manual says to place pocket holes 5/8 to 1-1/2 in. from the edge, then every 6 to 8 in.
  • Left out: weight and size. Kreg doesn’t list them the same way for both jigs.

What it can handle

These are common pocket-hole projects, checked against Kreg’s own thickness settings, box contents and manuals. I haven’t tested either jig. If a project is outside Kreg’s range, it gets a CAN’T.

ProjectKreg 520PROKreg 320
Builds
Face frames (3/4") Can do3/4 in. is one of its settings. Can do3/4 in. is one of its settings.
Cabinet boxes Can doWorks in almost any orientation on panels. Can doBring it to the panel and clamp it in place.
2x4 builds (1-1/2") Can do1-1/2 in. is one of its settings. Can do1-1/2 in. is one of its settings.
Thickness
Thin stock (1/2") Just barelyBottom of its range. Just barelyBottom of its range.
Under 1/2" Can’tBelow Kreg’s 1/2 in. minimum. Can’tBelow Kreg’s 1/2 in. minimum.
Setup
Clamping Can doBuilt-in pump clamp. Just barelyNeeds a clamp sold separately.
Repairs in place Can doWorks in almost any orientation. Can doRemove the thickness stops for repairs.

Pick screw length from Kreg’s chart for your stock thickness. Both jigs use the same Kreg screws.

Notes and sources

How the verdicts were made: thickness settings and setup come from Kreg’s product pages and manuals. Nothing here comes from hands-on testing or owner reviews.

Clamping: the 320 gets JUST BARELY because a clamp is needed and isn’t in the box.

Sources:

Who should buy which

Get the Kreg Pocket-Hole Jig 520PRO if:

  • You don’t have a clamp to spare.
  • You drill on big panels and in odd positions.
  • You want to clamp and release with one hand.
Check the Kreg 520PRO on Amazon

Get the Kreg Pocket-Hole Jig 320 if:

  • You already own clamps.
  • You want to set your own hole spacing.
  • You want everything in a carrying case.
Check the Kreg 320 on Amazon

As an Amazon Associate I earn from qualifying purchases.

Skip it if

Skip the Kreg 520PRO

if you already own clamps and want two adjustable drill guides.

Skip the Kreg 320

if you don’t own a clamp and don’t want to buy one.

Questions about this pair

Do I need a clamp for the Kreg 320?

Yes. Kreg says to secure it to the workpiece with a clamp, and none comes with the plain 320. It includes a clamp pad adapter.

Do the 520PRO and 320 handle the same thickness?

Yes. Both have settings for 1/2, 3/4 and 1-1/2 in. stock.

Do they use the same screws?

Yes. Both use standard Kreg pocket-hole screws.

Which comes with more screws?

The 520PRO comes with 60 and the 320 with 40.

Spec notes
  • Amazon listings compared: Kreg 520PRO KPHJ520PRO2 (B0DNR7ZP6M) and Kreg 320 KPHJ320 (B07VQ9S57K). There’s also a 320 bundle with a face clamp; it’s not the listing compared here.

Specs checked October 9, 2026 against Kreg's own pages and manuals. Links are in "Notes and sources" under the chart above.

By Mike E. · Last checked October 9, 2026 · Based on manufacturer specs. Not tested hands-on.