ShopwoodPlans

24" parallel bar clamps · Comparison

Bessey vs Jorgensen parallel clamp (2026): KRE3524 vs Cabinet Master 8024

The short answer

More force, driver socket? Bessey

Built-in stand? Jorgensen

Both are 24 in. parallel-jaw bar clamps with jaws that stay at 90° for square glue-ups, and both convert to spreaders. Bessey lists 1,700 lb of clamping force and a steel socket in the handle so you can tighten it with a hex key or driver. Jorgensen lists 1,500 lb, a slightly deeper reach (3-7/8 vs 3-3/4 in.) and a built-in stand for one-handed use.

Best for clamping force

Pick the Bessey K Body REVO KRE3524 if

  • You want the most force here: Bessey lists 1,700 lb.
  • You want to tighten with a driver. The handle has a steel hex socket (Bessey lists 17 Nm max).
  • You want add-ons later. Bessey sells an extender, a tilting adapter and table clamps for it.

KRE3524: one 24 in. clamp with three removable jaw pads and workpiece supports.

Check the Bessey clamp on Amazon

Best for one-handed setup

Pick the Jorgensen Cabinet Master 8024 if

  • You set up glue-ups alone. The built-in stand keeps the clamp upright for one-handed use.
  • You want a touch more reach: 3-7/8 in.
  • You want to spread as well as clamp. Reverse the sliding head.

8024: one 24 in. clamp with large plastic jaws and a built-in stand.

Check the Jorgensen clamp on Amazon

Before you buy: I compared one clamp against one clamp. When I checked on Oct 9, 2026, both listings were sold by third-party sellers, not Amazon. Bessey’s brochure says the KRE line ships as a 2-pack, but this Amazon listing is for one clamp. Listings change, so check who the seller is and that it’s new before you order.

As an Amazon Associate I earn from qualifying purchases.

Key specs

2Bessey KRE3524
spec rows won
1Jorgensen 8024
spec rows won
6even or
unclear

This counts the rows below where one is clearly better. It’s a tally, not an overall rating. Both are made for square cabinet and panel glue-ups. Jorgensen calls the 8024 “Medium-Duty.”

A green check means that number or feature is clearly better. No check means it's a tie, the gap is tiny, or the makers measure it differently. Every figure comes from Bessey or Jorgensen, not from Amazon.

Bessey KRE3524Jorgensen 8024
Capacity24 in.24 in.
Throat / reach3-3/4 in.3-7/8 in.
Clamping force1,700 lb1,500 lb
Jaws90°, 3 removable glue-resistant pads90°, large plastic jaws
Driver tighteningSteel hex socket in handle 17 Nm maxNot listed
Built-in standNot listedYes
SpreadingYes, 10-1/2 to 28-3/4 in., no toolsYes, reverse the sliding head
BarCold-drawn steel railSteel bar, 1-3/16 x 3/8 in.
Weight6.06 lbNot published
Spec notes
  • Reach: the Jorgensen reaches 1/8 in. deeper. That’s too small to call a clear win, so the row isn’t scored.
  • 2-pack: Bessey’s brochure says the KRE clamps ship as a 2-pack, but the Amazon listing compared here is a single clamp. Check the unit count on the listing.
  • Left out: warranty. I couldn’t confirm either clamp’s warranty from the makers’ pages.

What it can handle

These are common clamping jobs, checked against each maker’s published capacity, reach and features. I haven’t tested either clamp. If a job is past a published limit or needs a feature the maker doesn’t list, it gets a CAN’T.

ProjectBessey KRE3524Jorgensen 8024
Glue-ups
Panel (20" wide) Can doInside its 24 in. capacity. Can doInside its 24 in. capacity.
Cabinet boxes Can doBessey pitches it for precision cabinetry. Can doJorgensen lists box and cabinet assemblies.
Face frames Can doJaws stay at 90° to the rail. Can doJorgensen lists frame assemblies.
Reach and spread
Clamp 3-3/4" in Just barelyExactly its 3-3/4 in. throat. Can doInside its 3-7/8 in. reach.
Spreading Can doSpreads 10-1/2 to 28-3/4 in. without tools. Can doReverse the sliding head.
Handling
Self-standing Can’tNo stand listed. Can doBuilt-in clamp stand.
Driver tightening Can doHex socket in the handle, 17 Nm max. Can’tNot listed.
Delicate surfaces Can doRemovable pads; supports keep work off the rail. Can doLarge plastic jaws spread the pressure.

Capacity is the maximum opening. For a glue-up, leave room for cauls and the clamp head.

Notes and sources

How the verdicts were made: capacity, reach and features come from Bessey’s brochure and Jorgensen’s product page. Nothing here comes from hands-on testing or owner reviews.

Driver tightening: Bessey lists a 17 Nm max when you tighten with a hex key or driver. Don’t go past it.

Sources:

  • Bessey K Body REVOlution KRE brochure (capacity, throat, force, weight, spreading, handle socket): besseytools.com KRE brochure
  • Jorgensen Cabinet Master parallel jaw bar clamp page (capacity, reach, force, bar, stand): ponyjorgensen.com

Who should buy which

Get the Bessey K Body REVO KRE3524 if:

  • You want the most clamping force.
  • You like tightening with a driver.
  • You may add Bessey accessories later.
Check the Bessey clamp on Amazon

Get the Jorgensen Cabinet Master 8024 if:

  • You often set up glue-ups alone.
  • You need a little more reach.
  • You want a standing clamp that frees up a hand.
Check the Jorgensen clamp on Amazon

As an Amazon Associate I earn from qualifying purchases.

Skip it if

Skip the Bessey KRE3524

if you want a clamp that stands up on its own.

Skip the Jorgensen 8024

if you want more clamping force or driver tightening.

Questions about this pair

Which clamps harder, Bessey or Jorgensen?

Bessey lists 1,700 lb for the KRE3524. Jorgensen lists 1,500 lb for the 8024.

Can they be used as spreaders?

Yes. Bessey says the KRE spreads without extra tools, and Jorgensen says to reverse the sliding head.

Do they come in pairs?

The Amazon listings compared here are single clamps. Check the unit count before you order.

Which reaches deeper?

The Jorgensen, by 1/8 in.: 3-7/8 in. vs 3-3/4 in.

Spec notes
  • Amazon listings compared: Bessey KRE3524 (B07BTD6PGW) and Jorgensen 8024 (B00005R1HN). Both are single 24 in. clamps.

Specs checked October 9, 2026 against Bessey's and Jorgensen's own pages and manuals. Links are in "Notes and sources" under the chart above.

By Mike E. · Last checked October 9, 2026 · Based on manufacturer specs. Not tested hands-on.