Get the Milwaukee M18 FUEL 2737-20 if:
- You want to hook the saw to a shop vac without buying extras.
- You want the faster blade speed.
- You’re on M18 batteries, or you want the 5-year warranty.
Cordless D-handle jigsaws · Comparison
The short answer
Faster blade, dust tube in the box? Milwaukee
Speed dial, DeWalt batteries? DeWalt
These two are close on paper. Both are brushless D-handle jigsaws with a 1 in. stroke, four orbital settings, T-shank blades, an LED, a blower, and a shoe that bevels to 45° with stops at 0°, 15°, 30° and 45°. The Milwaukee runs faster (3,500 vs 3,200 strokes per minute) and comes with a dust cover and extraction tube. The DeWalt adds a speed dial on top of the variable-speed trigger.
Best for dust pickup

Tool only 2737-20: jigsaw, anti-splinter guard, dust cover, dust extraction tube, shoe cover, general-purpose blade, hex wrench. No battery.
Check the Milwaukee jigsaw on AmazonBest for DeWalt 20V owners

Tool only DCS334B: jigsaw and one blade. No battery.
Check the DeWalt jigsaw on AmazonBefore you buy: I compared the two bare tools (no battery or charger). When I checked on Oct 9, 2026, both listings were sold by third-party sellers, not Amazon. Milwaukee’s warranty covers tools bought from an authorized Milwaukee distributor. Listings change, so check who the seller is and that it’s new before you order.
As an Amazon Associate I earn from qualifying purchases.
This counts the rows below where one is clearly better. It’s a tally, not an overall rating. Most rows are a tie, so battery platform and warranty will decide this for most people.
A green check means that number or feature is clearly better. No check means it's a tie, the gap is tiny, or the makers measure it differently. Every figure comes from Milwaukee or DeWalt, not from Amazon.
| Milwaukee 2737-20 | DeWalt DCS334B | |
|---|---|---|
| Blade speed | 0–3,500 spm | 0–3,200 spm |
| Stroke length | 1 in. | 1 in. |
| Orbital settings | 4 (including straight) | 4 (including straight) |
| Speed control | Variable-speed trigger | Variable-speed trigger plus speed dial |
| Blade | T-shank, tool-free change | T-shank, keyless lever clamp |
| Shoe bevel | 0–45° L/R, stops at 0°, 15°, 30°, 45° | 0–45° L/R, stops at 0°, 15°, 30°, 45° |
| LED and blower | LED; blower with on/off | LED; integrated blower |
| Dust extraction parts | Dust cover and tube included | Shroud and chute sold separately |
| No-mar shoe cover | Included | Listed |
| Weight as listed | 4.85 lb without battery | 4.6 lb DeWalt Canada product weight |
| Tool warranty | 5 years | 3 years plus 1 year free service |
These are common jigsaw cuts, checked against what each maker lists the saw for and what’s in the box. I haven’t tested either saw. If a job needs something the maker doesn’t list, it gets a CAN’T.
| Cut | Milwaukee 2737-20 | DeWalt DCS334B |
|---|---|---|
| Wood | ||
| Curves in plywood | Can doOrbital settings 0–3 for wood. | Can doOrbital action is meant for soft materials like wood. |
| Hardwood | Can doMilwaukee says it has the power for hardwoods. | Can doListed for wood; DeWalt says no orbital action in hardwood. |
| Laminate and veneer | Can doShoe cover and anti-splinter guard included. | Can doNo-mar shoe cover for laminate and veneer. |
| Other materials | ||
| Sheet metal | Can doMilwaukee lists metal; orbital setting 0–1. | Can doDeWalt lists steel; no orbital action. |
| Plastic | Can doOrbital setting 0–2 for plastic. | Can doDeWalt lists plastic. |
| Setup | ||
| 45° bevels | Can doShoe bevels to 45° with a stop. | Can doShoe bevels to 45° with a positive stop. |
| Shop-vac hookup | Can doDust cover and extraction tube included. | Just barelyDust shroud and chute sold separately. |
Blade choice matters more than the saw for most of these cuts. Use a blade made for the material.
How the verdicts were made: materials and orbital settings come from each operator’s manual; box contents come from the product pages. Nothing here comes from hands-on testing or owner reviews.
Hardwood and metal: DeWalt’s manual says never to cut metal or hardwood with orbital action, and Milwaukee’s chart lists low orbital settings for metal. Both still list these materials, so both get CAN DO.
Shop-vac hookup: DeWalt’s manual calls the dust extraction shroud and chute an optional accessory, and says the shoe won’t bevel with them attached.
Sources:
These are bare tools, so your batteries decide a lot. The packs don’t cross over between brands.
The 2737-20 runs on M18 packs. Milwaukee says it cuts up to 105 linear feet of 3/4 in. laminated particle board on an XC5.0 pack.
The DCS334B runs on DeWalt 20V MAX XR packs. DeWalt doesn’t publish a runtime figure for it.
As an Amazon Associate I earn from qualifying purchases.
if you’re already on DeWalt 20V batteries. The two saws are close enough that a second battery system isn’t worth it.
if you want dust extraction parts in the box or the longer warranty.
Milwaukee lists up to 3,500 strokes per minute and DeWalt up to 3,200. Both have a 1 in. stroke.
Yes. Both use T-shank jigsaw blades.
Both shoes bevel up to 45° left and right, with stops at 0°, 15°, 30° and 45°.
No. Both listings here are tool only.
Specs checked October 9, 2026 against Milwaukee's and DeWalt's own pages and manuals. Links are in "Notes and sources" under the chart above.