Quick verdict
If you already own M18 batteries, the Milwaukee 2737-20 is the official pick with dust collection in the box: 0–3,500 SPM, a 1 in stroke, and a dust cover plus extraction tube included. [Source: Milwaukee 2737-20] If you already own 20V MAX batteries, the DeWalt DCS334B is the official tool-only saw in that line; the official instruction manual lists 0–3,200 min⁻¹ and a 26 mm stroke, and the official Includes list is the saw plus one blade—no dust shroud or chute. [Source: DeWalt DCS334B] Both take T-shank blades and have bevel stops at 0/15/30/45°. This is a specification-based guide, not a hands-on test. The side-by-side already lives on the Milwaukee vs DeWalt jigsaw comparison.
What actually differs
Start with the platform you already own. The 2737-20 is an 18 V DC M18 FUEL bare tool. [Source: Milwaukee 2737-20 manual] The DCS334B is a 20V MAX XR tool-only saw; DeWalt’s footnote says 20V MAX is the maximum initial battery voltage without a load, and the nominal voltage is 18 V. The battery is sold separately. [Source: DeWalt DCS334B]
| Spec | Milwaukee 2737-20 | DeWalt DCS334B |
|---|---|---|
| No-load speed | 0–3,500 SPM [manual] | 0–3,200 min⁻¹ in the official instruction manual; the current US product-page specs block does not list SPM |
| Stroke | 1 in [manual] | 26 mm in the official instruction manual; the current US product-page specs block does not list stroke |
| Orbital settings | 4-position; manual guide: wood 0–3, metal 0–1, aluminum 0–1, plastic 0–2, smooth cut 0 | 4-position; official manual: position 0 is straight, 1–3 are orbital; never cut metal or hardwoods in orbital action |
| Blades | T-shank | T-shank, all-metal lever-action keyless clamp |
| Bevel | Toolless, stops at 0/15/30/45° | All-metal keyless shoe, 0/15/30/45° with a positive stop at 45° |
| Dust collection in the box | Dust cover and extraction tube included | Not in the official Includes list; shroud and chute are accessories, and the manual says the tool will not bevel with them attached |
| Also in the box | Bare tool plus the dust parts above; non-marring shoe, LED, on/off blower | The saw, one blade, no-mar shoe cover, integrated dust blower, LED |
| Weight | 4.85 lb excluding battery, official US product-page specs | 2.1 kg without the battery pack in the official instruction manual (about 4.6 lb); the current US product page does not list weight |
| US warranty | 5-year limited to the original purchaser for electric power tools; return to a factory Service Center or Authorized Service Station | 3 Year Limited Warranty, 1 Year Free Service, 90 Days Satisfaction Guaranteed |
The DeWalt US product-page manual link returned HTTP 404 on this check, so SPM, stroke, weight, and the dust-accessory warning are taken from the official DCS334/DCS335 Type 10 instruction manual rather than from a US-hosted PDF.
How to choose
- Stay on the battery platform you already bought. Switching brands just to get a jigsaw means buying batteries and a charger you do not yet own; both of these listings are bare tools.
- If you want dust extraction without buying extra parts, the Milwaukee official Includes list already has a dust cover and an extraction tube. The DeWalt official Includes list does not.
- If you cut a lot of metal or hardwood, read the orbital rules before you buy the feature. Milwaukee’s manual allows metal only in positions 0–1 and lists a smooth-cut setting of 0. DeWalt’s manual says metal or hardwoods should never be cut in orbital action.
- Compare official no-load speed and stroke only as published: 0–3,500 SPM and 1 in on the Milwaukee, and 0–3,200 min⁻¹ and 26 mm in the DeWalt instruction manual. Those figures are not a cut-quality ranking.
- Weigh the official bare-tool figures, not a pack-on guess: 4.85 lb excluding the battery on Milwaukee’s US specs, and 2.1 kg without a pack in DeWalt’s instruction manual.
- Check the seller if you care about the full factory warranty. Milwaukee’s site-wide wording limits the 5-year limited warranty to the original purchaser from an authorized Milwaukee distributor. DeWalt limits warranty coverage to DeWalt or authorized sellers.
How to make the first cuts
Install a T-shank blade in the toolless clamp until it is seated, then confirm the lock before you start. Both official pages specify T-shank only.
Set orbital action for the material, not for speed. On the Milwaukee, use the manual table: wood 0–3, metal 0–1, aluminum 0–1, plastic 0–2, and 0 for a smooth cut. On the DeWalt, use position 0 for a straight cut and never put metal or hardwood in orbital action.
For a plunge cut on the Milwaukee, the official method is: set orbital to 0, rest the front of the shoe on the work, start the saw, and lower the blade into the cut. Harder materials need a starter hole. Do not use the transparent blade cover and the anti-splinter device for bevel or angle cuts.
If you attach a DeWalt dust shroud or chute later, the official manual says the tool will not bevel with those accessories on. Plan square cuts or remove the accessory before you tip the shoe.
Where to check the listings
Both tools were still sold on Amazon on November 19, 2026. The DeWalt DCS334B listing is the higher-volume of the two; the Milwaukee 2737-20 listing is live but has a thin review count, which is not the same as discontinued.
Milwaukee 2737-20
DeWalt DCS334B
As an Amazon Associate I earn from qualifying purchases. There are no prices on this page; check the listing for current availability.
Questions buyers actually ask
Do these saws take T-shank blades?
Yes. Milwaukee’s official 2737-20 page and DeWalt’s official DCS334B page both specify T-shank blades. The DeWalt uses an all-metal lever-action keyless clamp.
Does the DeWalt include dust extraction?
No. DeWalt’s official Includes list is the saw and one blade. The official instruction manual treats the dust shroud and chute as accessories and says the tool will not bevel with them attached. Milwaukee’s official box includes a dust cover and an extraction tube.
Can I cut metal or hardwood with orbital action on the DeWalt?
The official DCS334 instruction manual says metal or hardwoods should never be cut in orbital action. Use position 0 for a straight cut; positions 1 through 3 are orbital.
What is the official Milwaukee plunge-cut method?
Set orbital to 0, pivot on the front of the shoe, start the saw, and lower the blade. Harder materials need a starter hole. Do not use the transparent blade cover and anti-splinter device for bevel or angle cuts.