Side-by-side specs are on the comparison pages below.
Full specs side by side: DeWalt DWE7485 vs SKIL TS6307-00
Jobsite table saws · Single-tool guide
Quick verdict
The DWE7485 is a compact 8-1/4 in jobsite saw with rack-and-pinion fence rails, built for portability. It cuts 2x stock in one pass at 0° and 45°, but not a 4x4, and the manual rules out dado sets. Its manual gives full blade, fence and riving knife alignment steps, so check them the day it arrives.
Good fit
Look elsewhere
As an Amazon Associate I earn from qualifying purchases. Links on this page are Amazon affiliate links; buying through them doesn’t change what you pay.
From the official manual N865128 (p6–7): depth 2-9/16 in at 0° and 1-3/4 in at 45°; table 19 x 19 in; bevel -2° to 47° left; miter gauge 30° left and right; 5,800 rpm. Assembled weight is 55.57 lb (DeWalt product page). The fence mounts in position 1 (0–20 in right of the blade), position 2 (4–24.5 in) or on the left.
Rip capacity: 24.5 in to the right of the blade, from DeWalt’s feature list and the manual’s fence position 2 (4–24.5 in). One data field on DeWalt’s product page says 24.0 in; we use the 24.5 in figure. The calculator uses 24.5 in.
What that means (our math from the official figures, not a maker claim): 2x stock (1.5 in) cuts in one pass at 0° and 45°; a 4x4 (3.5 in) doesn’t.
Static check: the DWE7485 rips up to 24.5 in to the right of the blade.
Owner threads here come from web-search result snippets on Oct 22, 2026; Reddit blocked direct reads, so we didn’t open the threads in full. Small sample: a count means “this many of the threads that search returned”, not a failure rate. We didn’t check Amazon reviews for this tool. For this saw, our search found two alignment threads, but neither confirms the DWE7485 in its title, so we don’t count them and make no owner claim yet.
Length: 3-year limited warranty, 1-year free service contract and a 90-day money-back period (dewalt.com warranty page, read Oct 21, 2026). It covers the original end user only.
Who’s covered: DeWalt says the warranty applies only to tools bought from DeWalt or a DeWalt authorized seller, and it may reject claims for tools bought from unauthorized sellers, including unauthorized websites. DeWalt doesn’t name Amazon.com either way. If you’re unsure about a seller, DeWalt says to ask internetadmin@sbdinc.com.
Registration: not required, and nothing on DeWalt’s warranty page says it extends the term.
Not covered: normal wear, abuse, accessories, and repairs someone else attempted.
How to claim: 1) Find your receipt. DeWalt says proof of purchase showing when and where you bought it may be required, and a receipt is required for the 90-day refund. 2) Use DeWalt’s web request form at support.dewalt.com (DeWalt calls it the fastest route), call 1-800-433-9258, or take the tool to a DeWalt service center (dewalt.com/service-center). 3) Don’t open the tool yourself first; repairs by others are excluded.
From DeWalt DWE7485 manual N865128 (official current file; the Type 3 and Type 4 paths on dewalt.com served the same PDF when checked Nov 10, 2026). Page numbers are PDF pages. Unplug the saw before any adjustment.
Not linked yet: we haven’t verified retail listings for these parts.
Why: Replacement or a finer-tooth blade.
Who can skip it: Until the stock blade dulls.
Is it good? Not tallied.
Official or third-party: Either.
Will it fit? 8-1/4 in (210 mm) only, 5/8 in arbor, rated 6,000 rpm or more; no abrasive or diamond wheels (manual p9–10). Riving knife depends on your saw’s Type: the Type 3 manual (N865128) has a .087 in (2.2 mm) knife, for blades with a kerf of .094 in (2.4 mm) or more and a body of .079 in (2.0 mm) or less. The earlier manual we read (N689972) lists a 0.063 in knife for kerfs of 0.071 in or more. Check the Type on your nameplate and the thickness marked on the knife.
No listing: blade part numbers aren’t verified yet.
Why: Working height; many buyers search for one.
Who can skip it: If you have a bench or cart.
Is it good? Not tallied.
Official or third-party: Official DeWalt.
Will it fit? All three are named in the manual (p14). The manual says the DWE74911 fits only if bought separately. The saw’s feet have holes for DW7440RS brackets (p8).
Not linked yet.
Why: Joins the guard port and the rear port to one vac hose.
Who can skip it: If you run only the rear port.
Is it good? Not tallied.
Official or third-party: Official DeWalt.
Will it fit? The manual says it’s sold as an accessory but gives no part number (“contact your local dealer”, p13).
No part number yet.
Why: Grooves and dados.
Who can skip it: Everyone with this saw.
Is it good? n/a
Official or third-party: n/a
Will it fit? Not supported: the manual says “DO NOT use dado sets, multiple blades or shaping cutter heads on this saw” (p6).
No link.
As an Amazon Associate I earn from qualifying purchases. Links on this page are Amazon affiliate links; buying through them doesn’t change what you pay.
Side-by-side specs are on the comparison pages below.
Full specs side by side: DeWalt DWE7485 vs SKIL TS6307-00
No. It takes 8-1/4 in blades with a 5/8 in arbor only.
No. The official manual (N865128) says “DO NOT use dado sets, multiple blades or shaping cutter heads on this saw.” The Type 3 and Type 4 manual URLs on dewalt.com currently serve this same file.
24.5 in to the right of the blade, with the fence in position 2. DeWalt says that’s enough for ripping 4x8 plywood or OSB sheets. One data field on DeWalt’s product page says 24.0 in; its feature list and the manual say 24.5 in.
2-9/16 in at 0° and 1-3/4 in at 45°.
The manual names the DW7440RS, DW7451 and DWE74911 (bought separately).
It depends on the Type: .087 in in the Type 3 manual, 0.063 in in the earlier manual we read.
No.
The Type 3 manual (N865128, p14) lists the DW7440RS, DW7451 and DWE74911. The DWE74911 fits only when bought on its own: the one bundled with the DWE7491RS lacks the DWE7485 brackets.
55.57 lb assembled, per DeWalt’s US product page. No stand is included.
As an Amazon Associate I earn from qualifying purchases. Links on this page are Amazon affiliate links; buying through them doesn’t change what you pay.