ShopwoodPlans

12 in compound miter saws · Comparison

DeWalt DWS780 vs DWS716 miter saw

The short answer

Crosscut boards wider than 8 in? DWS780

Want a shorter, non-sliding saw? DWS716

Both are 12 in double-bevel DeWalt saws with a 15 A, 3,800 rpm motor, a 1 in arbor and the same 3-year warranty. The difference is the slide. The DWS780 slides, so DeWalt rates it to a 2x14 at 90°, and it adds the XPS cut-line light. The DWS716 doesn’t slide: its manual tops out at 7.9 in wide at 0°, but it’s shorter and lighter.

Best for wide boards

Pick the DeWalt DWS780 if

Full DeWalt DWS780 review

  • You crosscut wide boards: DeWalt rates it to a 2x14 at 90° and a 2x10 at 45°.
  • You want a cut-line guide: it has DeWalt’s XPS LED shadow line.
  • You cut big crown: 7-1/2 in nested, against 6-5/8 in.

Box: saw, 12 in carbide blade, blade wrench, dust bag, vertical material clamp.

Check the DeWalt DWS780 on Amazon

Best for a smaller non-sliding saw

Pick the DeWalt DWS716 if

Full DeWalt DWS716 review

  • Your boards are a 2x8 or narrower. Its manual rates it to 7.9 in wide at 0° (2.9 in high), and a 2x8 is 7.25 in wide.
  • You want a shorter saw for a crowded bench: 26.62 in long, against 32.33 in.
  • You want 14 positive miter stops and bevels to 48° both ways.

Box: saw, 12 in carbide-tipped blade, wrench, dust bag, vertical clamp.

Check the DeWalt DWS716 on Amazon

Before you buy: If you’re buying a used DWS780, check its date code first: it was part of DeWalt’s 2022 rear-guard recall (CPSC 22-196). See the recall check on our DWS780 review. New stock should be outside the recalled date codes, but check the model number and seller on both listings before you order.

As an Amazon Associate I earn from qualifying purchases. Links on this page are Amazon affiliate links; buying through them doesn’t change what you pay.

Which is better at what

4DeWalt DWS780
spec rows won
2DeWalt DWS716
spec rows won
9even or
unclear

This counts the rows below where one is clearly better. It’s a tally, not a rating.

DWS780 wins 4: three cut-capacity rows and the cut-line light. DWS716 wins 2: weight and length. A green check means a gap of more than 5% or a feature only one maker lists. Every figure comes from the makers, not Amazon.

DeWalt DWS780DeWalt DWS716
DesignSliding, double bevelNon-sliding, double bevel
Motor15 A, 3,800 rpm15 A, 3,800 rpm
Blade and arbor12 in; 1 in arbor, adapter for 5/8 in blades12 in; 1 in arbor
Crosscut at 0° miter2x14 (DeWalt); manual: 13.75 in wide at 3.0 in high7.9 in wide at 2.9 in high (manual)
Tallest cut at 0° miter4.4 in high at 9.1 in wide (manual)3.6 in high at 7.2 in wide (manual)
Crosscut at 45° miter2x10 (DeWalt); manual: 9.6 in wide at 3.0 in high5.5 in wide at 2.9 in high (manual)
Miter50° left, 60° right; 10 positive stops0–50° left and right; 14 positive stops
Bevel49° left and right0–48° left and right; stops at 0, 22.5, 33.9, 45°
Crown, nested7-1/2 in6-5/8 in
Base, vertical6-3/4 in6-1/2 in
Cut-line lightXPS LED shadow lineNone listed
DustBag; DeWalt claims over 75% captureDust duct and bag
Weight56.0 lb assembled50.35 lb assembled DeWalt Canada lists 41 lb
Length x width x height32.33 x 23.0 x 19.5 in26.62 x 22.44 x 19.7 in
Warranty3-yr limited, 1-yr free service, 90-day3-yr limited, 1-yr free service, 90-day
Spec notes and sources
  • The two crosscut-at-0° rows and the 45° row all come from the slide, so read them as one advantage, not three.
  • Crown (7-1/2 in against 6-5/8 in nested) isn’t scored, so the slide’s capacity edge doesn’t count four times.
  • DWS716 weight: DeWalt’s US page lists 50.35 lb; DeWalt’s Canadian page lists 41 lb. Either way it’s lighter than the DWS780’s 56.0 lb, so the row is scored.
  • DWS780 power: DeWalt’s US manual says 1,600 W input, but its US feature list says “1100 watt motor”. Neither is used for scoring.
  • Base capacity (6-3/4 in vs 6-1/2 in) and bevel (49° vs 48°) are within 5%, so they aren’t scored. Noise isn’t published for either saw.
  • The DWS716XPS is a different model with a cut-line light. This page covers the base DWS716.

Sources (checked November 10, 2026):

The verdict

The DWS780 wins 4 rows to 2 and is the pick if you cut boards wider than about 8 in, like shelving, stair treads or wide trim, or want the XPS light. Pick the DWS716 if your boards are a 2x8 or narrower and you want a shorter, lighter saw that bevels both ways.

As an Amazon Associate I earn from qualifying purchases.

By Mike E. · Specs checked November 10, 2026 · Based on manufacturer specs. Not tested hands-on.