ShopwoodPlans

12 in sliding miter saws · Comparison

DeWalt DWS780 vs Makita LS1219L miter saw

The short answer

Want a laser and a flush-to-wall slide? Makita

Want a lighter saw and longer warranty? DeWalt

Both are 12 in, 15 A, double-bevel sliding saws with 1 in arbors and 6-3/4 in of vertical base capacity. The Makita LS1219L has a direct-drive motor with soft start, a laser, and a 2-steel-rail slide Makita says works flush against a wall. The DeWalt DWS780 has the XPS LED shadow line, weighs 9 lb less and has a 3-year warranty against Makita’s 1 year.

Best for capacity and a laser

Pick the Makita LS1219L if

  • You want a laser: Makita’s shows the cut line whether the blade is spinning or not.
  • You work against a wall: Makita says its 2-steel-rail slide lets the saw run flush against one.
  • You cut big stock or crown: 3-5/8 x 15 in at 90°, 8 in nested crown, and miters to 60° both ways.

Box: saw, 12 in 60-tooth carbide blade, dust bag, vertical vise, triangular rule, hex wrench.

Check the Makita LS1219L on Amazon

Best for weight and warranty

Pick the DeWalt DWS780 if

Full DeWalt DWS780 review

  • You move the saw around: 56.0 lb assembled, against Makita’s 65 lb.
  • You want the longer warranty: 3 years limited plus 1 year of free service, against Makita’s 1 year for corded tools.
  • You want a faster blade: 3,800 rpm no-load, against 3,200.

Box: saw, 12 in carbide blade, blade wrench, dust bag, vertical material clamp.

Check the DeWalt DWS780 on Amazon

Before you buy: Makita’s US page still lists the LS1219L as current, but some dealers mark it discontinued, so check the listing is a new LS1219L from a seller you trust. If you’re buying a used DWS780, check its date code first: it was part of DeWalt’s 2022 rear-guard recall (CPSC 22-196). See the recall check on our DWS780 review.

As an Amazon Associate I earn from qualifying purchases. Links on this page are Amazon affiliate links; buying through them doesn’t change what you pay.

Which is better at what

5Makita LS1219L
spec rows won
2DeWalt DWS780
spec rows won
8even or
unclear

This counts the rows below where one is clearly better. It’s a tally, not a rating.

Makita wins 5: motor features, miter range, cut capacity, crown and the wall-flush slide. DeWalt wins 2: weight and warranty. A green check means a gap of more than 5% or a feature only one maker lists. Every figure comes from the makers, not Amazon.

Makita LS1219LDeWalt DWS780
Motor15 A direct drive; soft start, electric brake, constant-speed control15 A; belt drive (the manual covers belt service)
No-load speed3,200 rpm3,800 rpm
Blade and arbor12 in; 1 in arbor; 60-tooth blade included12 in; 1 in arbor, adapter for 5/8 in blades
Miter0–60° left and right; stops at 0, 15, 22.5, 31.6, 45, 60°50° left, 60° right; 10 positive stops
Bevel0–48° left and right49° left and right
Max cut at 90°3-5/8 x 15 in2x14 (DeWalt); manual: 13.75 in wide at 3.0 in high
Max cut at 45° miter3-5/8 x 10-1/2 in2x10 (DeWalt); manual: 9.6 in wide at 3.0 in high
Crown, nested8 in7-1/2 in
Base, vertical6-3/4 in6-3/4 in
Cut-line guideBuilt-in laser, adjustable left or right of bladeXPS LED shadow line
Slide2 steel rails; Makita says it runs flush against a wallSliding (DeWalt’s US page doesn’t describe the rails)
DustTwo ports: bag (included) or vacuumBag; DeWalt claims over 75% capture
Weight65 lb net56.0 lb assembled
Length x width x height35-1/4 x 26-1/8 x 28-1/2 in32.33 x 23.0 x 19.5 in
Warranty1 year (Makita general limited warranty); 30-day return or replacement3-yr limited, 1-yr free service, 90-day
Spec notes and sources
  • Cut capacity: Makita’s 3-5/8 x 15 in at 90° beats the DWS780 manual’s standard 13.75 in at 3.0 in high. The DeWalt manual also lists a special setup that reaches 16.1 in wide at 1.5 in high, so for thin stock the gap can close. The 45° row is left unscored so capacity isn’t counted twice.
  • Motor: the “win” is for the extras Makita lists (soft start, electric brake, constant-speed control). DeWalt’s US page doesn’t list those, which doesn’t prove the saw lacks them. Speed isn’t scored.
  • Sizes aren’t scored: the listed dimensions don’t say how much room each slide needs behind the saw.
  • DWS780 power: DeWalt’s US manual says 1,600 W input, but its US feature list says “1100 watt motor”. Neither is scored.
  • Noise isn’t published for either saw on the US pages. Dust claims are the makers’, not measurements.
  • Makita warranty: the LS1219L is corded, so it gets Makita’s 1-year general limited warranty, not the 3-year term for lithium-ion tools.

Sources (checked November 10, 2026):

The verdict

The Makita LS1219L wins 5 rows to 2 and is the pick if you want a laser, more listed capacity and a slide that works against a wall. Pick the DeWalt DWS780 if you’ll carry the saw (9 lb lighter) or want the 3-year warranty over Makita’s 1 year.

As an Amazon Associate I earn from qualifying purchases.

By Mike E. · Specs checked November 10, 2026 · Based on manufacturer specs. Not tested hands-on.