ShopwoodPlans

5 in random orbit sanders · Comparison

Makita BO5041 vs Bosch ROS20VSC sander

The short answer

Want slow speeds and a two-hand grip? Makita

Want a palm sander with a canister and a bag? Bosch

Both are corded 5 in random orbit sanders with hook-and-loop pads that top out at 12,000 orbits per minute. The Makita BO5041 has a 3 A motor, goes down to 4,000 OPM, uses a 1/8 in orbit and has an adjustable front handle. The Bosch ROS20VSC is a 2.5 A palm sander with a 3/32 in orbit, a pad dampening brake, and a microfilter dust canister, vacuum adapter and carrying bag in the box.

Best for control and slow work

Makita BO5041 5 in random orbit sander on a wood panel, hooked up to a vacuum hose
Shown hooked up to a vacuum hose. Photo: “Makita BO5041 Random Orbit Sander” by Mark Hunter (Toolstop), via Wikimedia Commons, CC BY 2.0. Resized.

Pick the Makita BO5041 if

Full Makita BO5041 review

  • You want slow speeds: 4,000-12,000 OPM, against the Bosch’s 7,500-12,000.
  • You want a front handle for two-hand control on big panels, plus a lock-on trigger.
  • You want the bigger motor and the lighter tool: 3 A and 3.1 lbs, against 2.5 A and 3.5 lb.

Box: sander, dust bag and dust bag nozzle.

Check the Makita BO5041 on Amazon

Best for palm sanding with a shop vac

Pick the Bosch ROS20VSC if

Full Bosch ROS20VSC review

  • You’ll hook it to a shop vac. The VAC002 adapter comes in the box, along with a microfilter dust canister.
  • You want a palm grip with a separate on/off switch and variable speed.
  • You want a carrying bag and a soft pad in the box.

Box: sander, sanding disc, RS034 soft pad, dampening ring, microfilter dust canister, VAC002 adapter, carrying bag.

Check the Bosch ROS20VSC on Amazon

Before you buy: Check who the Amazon seller is and that the item is new before you order.

As an Amazon Associate I earn from qualifying purchases. The Amazon buttons on this page are affiliate links.

Which is better at what

4Makita BO5041
spec rows won
1Bosch ROS20VSC
spec rows won
6even or
unclear

This counts the rows below where one is clearly better. It’s a tally, not a rating.

Makita wins 4: motor, speed range, weight and handle. Bosch wins 1: what’s in the box. The rest are even or a trade-off. A green check means a gap of more than 5% or a feature only one has. Every figure comes from Makita’s and Bosch’s US product pages, not Amazon.

Makita BO5041Bosch ROS20VSC
Motor3 A, corded2.5 A, 120 V, corded
Speed4,000-12,000 OPM, variable7,500-12,000 OPM, variable
Orbit1/8 in3/32 in (2.5 mm)
Pad4-7/8 in pad; 5 in, 8-hole hook-and-loop discs5 in pad (soft RS034 included); hook-and-loop
Weight3.1 lbs3.5 lb
Size (L × W × H)10-7/8 × 4-7/8 × 6 in9 × 5 × 6 in
Handle and switchAdjustable front handle; two-finger trigger with lock-onPalm grip; separate on/off and variable-speed control
Swirl controlPad control system (pad brake)Integral pad dampening brake
Vibration3.5 m/s²“Low-vibration” (no figure published)
DustThrough-the-pad; dust bag, nozzle, built-in vacuum port adapterMicrofilter dust canister; VAC002 vacuum hose adapter
In the boxDust bag and dust bag nozzleSanding disc, soft pad, dampening ring, canister, VAC002 adapter, carrying bag
Spec notes
  • Orbit gets no check. A bigger orbit generally removes material faster, and a smaller one leaves a finer scratch pattern, so it’s a trade-off, not a win.
  • Size gets no check. Makita’s current US page says 10-7/8 in long, but some Makita manuals list about 8-5/8 in. This page uses the US page.
  • Vibration gets no check because Bosch publishes no number.
  • Cord length and noise are left out. Neither maker lists them on its US product page.
  • Warranty is left out because it wasn’t part of this spec check.

The verdict

The Makita BO5041 wins 4 rows to 1 and is the pick: the lower speed range, front handle, bigger motor and lower weight give more control on big panels and finish work. Pick the Bosch ROS20VSC if you sand one-handed, run it off a shop vac, or want the canister, soft pad and carrying bag in the box.

As an Amazon Associate I earn from qualifying purchases.

Skip it if

Skip the Bosch ROS20VSC

Skip it if you need slow speeds: it starts at 7,500 OPM, while the Makita goes down to 4,000 OPM. Skip it too if you want a front handle for two-hand control. It’s a palm grip only. Source: Makita, Bosch.

Skip the Makita BO5041

Skip it if you want a microfilter canister instead of a dust bag, or a carrying bag in the box. The Bosch includes both, plus a VAC002 vacuum adapter. Source: Makita, Bosch.

Questions about this pair

What sandpaper does the Makita use?

5 in, 8-hole hook-and-loop discs. The pad itself is 4-7/8 in. Source: Makita.

Does the Makita have a front handle?

Yes. It has an adjustable front handle and a large two-finger trigger with lock-on. The Bosch is a palm sander with a separate on/off switch. Source: Makita, Bosch.

What dust accessories come with the Bosch?

A microfilter dust canister and the VAC002 vacuum hose adapter, plus a carrying bag, a sanding disc and an RS034 soft pad. Source: Bosch.

What is the Bosch’s speed range?

7,500-12,000 OPM, with a separate on/off switch and variable-speed control. The Makita runs 4,000-12,000 OPM. Source: Makita, Bosch.

Which one is lighter?

The Makita: 3.1 lbs against 3.5 lb, both from the makers’ US pages. Source: Makita, Bosch.

By Mike E. · Specs checked November 10, 2026 · Based on manufacturer specs. Not tested hands-on.