ShopwoodPlans

Jobsite table saws · Comparison

DeWalt DWE7485 vs DWE7491RS table saw

The short answer

Rip wide panels or want a stand? DWE7491RS

Want a compact saw for a bench? DWE7485

Both are 15 A DeWalt jobsite saws with rack-and-pinion fences, 5/8 in arbors and the same 3-year limited warranty, 1 year of free service and 90-day satisfaction guarantee. The DWE7485 is the compact 8-1/4 in saw: 24.5 in of rip, 2-9/16 in of depth and no stand in the box. The DWE7491RS is the 10 in saw on a rolling stand: 32-1/2 in of rip and 3-1/8 in of depth.

Best for wide rips and deeper cuts

Pick the DeWalt DWE7491RS if

Full DeWalt DWE7491RS review

  • You rip wider panels: 32-1/2 in to the right of the blade, against 24.5 in.
  • You want deeper cuts: 3-1/8 in at 90° and 2-1/4 in at 45°, against 2-9/16 in and 1-3/4 in.
  • You want the stand in the box and a bigger table: 21-7/8 x 26-3/8 in, against 19 x 19 in.

Box: saw, rolling stand, 10 in 24-tooth carbide blade, rip fence, miter gauge, blade guard assembly, push stick, two blade wrenches.

Check the DeWalt DWE7491RS on Amazon

Best for a compact saw

Pick the DeWalt DWE7485 if

Full DeWalt DWE7485 review

  • You want a compact 8-1/4 in saw with a metal roll-cage base that sits on a bench or a shelf: 55.57 lb assembled, with no stand to store.
  • Your rips stay at 24.5 in or less. DeWalt says that’s enough for ripping 4x8 plywood or OSB sheets.
  • You want bevels a little past 45°: it tilts −2° to 47° left.

Box: saw, fence, 8-1/4 in blade, riving knife, anti-kickback pawls, modular guard, miter gauge, push stick, two wrenches. No stand; DeWalt lists the DWE74911 rolling stand as compatible.

Check the DeWalt DWE7485 on Amazon

Before you buy: Neither saw cuts a 4x4 (3-1/2 in) in one pass: the max depths are 3-1/8 in and 2-9/16 in. The DWE7491RS listing is the saw with the rolling stand (“RS”); check the model number and seller on both listings before you order.

As an Amazon Associate I earn from qualifying purchases. Links on this page are Amazon affiliate links; buying through them doesn’t change what you pay.

Which is better at what

5DeWalt DWE7491RS
spec rows won
1DeWalt DWE7485
spec rows won
8even or
unclear

This counts the rows below where one is clearly better. It’s a tally, not a rating.

DWE7491RS wins 5: both depths, rip, table size and the included stand. DWE7485 wins 1: bevel range. A green check means a gap of more than 5% or a feature only one maker lists. Every figure comes from the makers, not Amazon.

DeWalt DWE7491RSDeWalt DWE7485
Motor15 A, 4,800 rpm no-load15 A, 5,800 rpm no-load
Blade10 in; 24-tooth carbide included8-1/4 in
Arbor5/8 in5/8 in
Depth at 90°3-1/8 in2-9/16 in
Depth at 45°2-1/4 in1-3/4 in
Rip right of blade32-1/2 in24.5 in one data field on DeWalt’s page says 24.0 in
Rip left of bladeNot publishedNot published
Table size21-7/8 x 26-3/8 in19 x 19 in
Bevel0° to 45° left−2° to 47° left
Miter gauge30° left and right30° left and right
StandRolling stand includedNot included (DWE74911 compatible, sold separately)
Weight112.0 lb assembled, with stand manual: saw alone more than 55.2 lb55.57 lb assembled, no stand
Assembled size (L x W x H)30.63 x 23.58 x 30.25 in, on its stand26.75 x 14.19 x 27.25 in
Warranty3-yr limited, 1-yr free service, 90-day3-yr limited, 1-yr free service, 90-day
Spec notes and sources
  • Rip: the DWE7485’s 24.5 in comes from DeWalt’s feature list and the manual’s fence position 2 (4 to 24.5 in). One structured field on the same DeWalt page says 24.0 in; this page uses 24.5 in.
  • Weight isn’t scored. DeWalt’s 112.0 lb for the DWE7491RS includes the rolling stand, and its manual lists the saw alone at more than 55.2 lb, which is close to the DWE7485’s 55.57 lb. Assembled sizes aren’t scored for the same reason.
  • Motor speed isn’t scored because the blades are different sizes.
  • The DWE7485 lists a blade brake, power-loss reset and tool-free modular guarding. Those weren’t on the DWE7491RS feature list we checked, so they aren’t scored either way.
  • Left rip isn’t published as a number for either saw. Noise isn’t published for either.
  • The DWE7491RS dust-port size isn’t on DeWalt’s US page, so it’s left out.

Sources (checked November 10, 2026):

The verdict

The DWE7491RS wins 5 rows to 1 and is the pick if you rip sheet goods or want the saw on its own stand: 32-1/2 in of rip, deeper cuts and a bigger table. Pick the DWE7485 if you want a compact 8-1/4 in saw to set on a bench or a shelf and your rips stay at 24.5 in or less.

As an Amazon Associate I earn from qualifying purchases.

By Mike E. · Specs checked November 10, 2026 · Based on manufacturer specs. Not tested hands-on.