Quick verdict

The Makita BO5041 is a corded 5-inch random-orbit sander with a 3 AMP motor, a 4,000–12,000 OPM variable-speed dial, and a one-year US limited warranty. Official Makita pages disagree on pad size, net weight, and overall length; those conflicts are flagged below. This page deepens the BO5041 review. It is not a recap of the Bosch or DeWalt comparison pages.
This page deepens the Makita BO5041 review with leftover official buyer questions. It is not a versus page, and no other sander is recommended here as a buy.
As an Amazon Associate I earn from qualifying purchases. Links on this page are Amazon affiliate links; buying through them doesn’t change what you pay.
Official specs

The US model is BO5041. The current kit, BO5041K, is the same corded tool plus a tool case.
| Spec | Official value |
|---|---|
| Abrasive disc | 5-inch, 8-hole, hook-and-loop, quick-change. Current product pages say abrasive paper is sold separately |
| Pad size (round) | 4-7/8 in on the BO5041 product page, or 4-13/16 in on the BO5041K page and the NTF flyer — conflict UNVERIFIED |
| Orbit diameter | 1/8 in random orbit |
| Motor | 3 AMP, corded, double insulated |
| Speed | 4,000–12,000 OPM, variable-speed dial |
| Net weight | 3.1 lb on the BO5041 product page and in the instruction manual, or 3.5 lb on the BO5041K page and the NTF flyer — conflict UNVERIFIED |
| Dimensions (L × W × H) | 10-7/8 × 4-7/8 × 6 in on the product pages, or 218 × 123 × 153 mm (8-5/8 × 4-7/8 × 6 in) in the instruction manual linked from the US BO5041K page — conflict UNVERIFIED |
| Dust collection | Through-the-pad system with a built-in vacuum-port adapter. Dust bag and dust nozzle are included |
| Switch | Large two-finger trigger with a lock-on button |
| Front handle | Adjustable for corners and confined areas; the manual says it can be loosened, moved horizontally, and retightened, and can be removed |
| Pad control | Official wording includes a pad brake and a pad-control system for controlled pad speed at start-up |
| In the BO5041 box | Dust bag and dust nozzle. Current pages say abrasive paper is sold separately |
| In the BO5041K box | Dust bag, dust nozzle, and tool case. Current pages say abrasive paper is sold separately. One older flyer lists one #120 disc with the kit |
| US warranty | One-year Makita General Product Limited Warranty from the original purchase date. Return the complete product to a Makita factory or authorized service center for inspection; repair or replacement without charge if it is defective. Limitations and exclusions apply |
FAQ
What disc size and hole pattern does it use?
A 5-inch, 8-hole hook-and-loop disc. Align the holes in the disc with the holes in the pad. Current US product pages say abrasive paper is sold separately.
How does dust collection work, and what is in the box?

Dust is collected through the pad. A high-capacity system and a built-in vacuum-port adapter are official. The dust bag and dust nozzle come with both the BO5041 and the BO5041K. The manual says to empty the bag when it is about half full, after unplugging the tool. Makita also notes that a variety of hoses and adapters are sold separately for vacuum systems.
Is the front handle adjustable?
Yes. Official product wording is that the adjustable front handle allows sanding in corners and confined areas. The instruction manual says the front grip can be loosened, moved horizontally, retightened, and installed or removed from the grip base.
What is the speed range, and when does Makita say to change it?
4,000–12,000 OPM on the variable-speed dial, to match the material. The BO5041 instruction manual describes the dial as infinitely adjustable, with higher speed toward number 5, and shows ranges for polishing, finish sanding, and regular sanding, with a note that results may differ. For polishing, it says to operate at low speed.
Is there a pad brake or start-up control?
Yes. Official wording includes a pad brake for reduced gouging and a pad-control system for controlled pad speed at start-up.
Is this corded or battery-powered?
Corded and double insulated. This is not a cordless model.
What is in the BO5041 box versus the BO5041K kit?
The BO5041 includes a dust bag and dust nozzle. The BO5041K adds a tool case. Current product pages say abrasive paper is sold separately. One older BO5041K flyer lists one #120 abrasive disc with the kit.
What is the official US warranty?
One year from the original purchase date under Makita’s General Product Limited Warranty, covering defects in workmanship and materials. If inspection shows a defect, Makita repairs or replaces the tool without charge at a factory or authorized service center. See the full limitations and exclusions on Makita’s warranty page. This is not Makita’s 3-year Li-Ion warranty.
Who this tool is for
Official Makita US pages call the BO5041 ideal for woodworkers, finish carpenters, and general contractors. The instruction manual says it is intended for sanding large surfaces of wood, plastic, and metal, as well as painted surfaces. It is a corded, variable-speed 5-inch random-orbit sander with an adjustable front handle and through-the-pad dust collection. No other model is recommended here as a buy.