ShopwoodPlans

Impact drivers · Single-tool guide

DeWalt DCF845B impact driver

Quick verdict

The DCF845B is my pick for a DeWalt 20V MAX owner who wants a small-screw mode rather than changing battery platforms. DeWalt lists 1,825 in-lbs maximum torque and three speeds; Precision Drive is specifically described for cabinet hinge and machine screws. This is a specification-based recommendation, not a hands-on test. [1]

Good fit

DeWalt DCF845 20V MAX XR 3-speed impact driver, side view, shown with battery
Image: DeWalt. Shown with a battery, which is sold separately.

Get it if

  • You already use DeWalt 20V MAX batteries; this is a bare tool with no battery or charger. [3]
  • You fit cabinet hinges or small hardware and want Precision Drive. [3]
  • You want a chip-ready tool for optional Tool Connect tracking; the chip is sold separately. [3]

Look elsewhere

Skip it if

  • You need a tool that sets a specified final torque: the manual says to check with a hand torque wrench. [3]
  • You need round-shank drill bits: the chuck accepts 1/4 in hex accessories. [3]
  • You want a dedicated self-tapping screw mode; none is listed for this model. [3]

As an Amazon Associate I earn from qualifying purchases. Links on this page are Amazon affiliate links; buying through them doesn’t change what you pay.

Usage info: our math

The manual gives 0–1,500, 0–2,800 and 0–3,400 rpm. Precision Drive tops out at 1,500 rpm: about 44% of the high-mode ceiling (1,500 ÷ 3,400). That is a speed-range calculation, not a prediction of driving time or fastening accuracy. [3]

Confirmed specificationDeWalt DCF845B
Maximum torque1,825 in-lbs [3]
Speeds0–1,500 / 0–2,800 / 0–3,400 rpm [3]
Chuck1/4 in hex quick release; takes 1 in bit tips [3]
Work light3 LEDs [3]
TrackingTool Connect chip-ready; chip sold separately [3]
Weight label2.35 lb assembled product weight; not established as bare-tool weight [3]

Who it’s for, who should skip

Who it’s for

  • You already use DeWalt 20V MAX batteries; this is a bare tool with no battery or charger. [3]
  • You fit cabinet hinges or small hardware and want Precision Drive. [3]
  • You want a chip-ready tool for optional Tool Connect tracking; the chip is sold separately. [3]

Who should skip it

  • You need a tool that sets a specified final torque: the manual says to check with a hand torque wrench. [3]
  • You need round-shank drill bits: the chuck accepts 1/4 in hex accessories. [3]
  • You want a dedicated self-tapping screw mode; none is listed for this model. [3]

Honest downsides

What owners don’t like

Evidence gap: no real dated, model-specific owner-review tally is available in the supplied sources. No “Y of X reviews,” failure rate or owner-consensus claim is made. The downsides above are documented specification limits or clearly marked gaps, not owner findings.

Warranty and claims

The existing comparison records a 3-year tool warranty plus 1 year of free service from DeWalt’s product data. Do not assume the current Amazon seller is authorized: the single-tool template notes that DeWalt limits warranty coverage to DeWalt or authorized sellers. [3]

The authorized-seller restriction is recorded in the existing DeWalt single-tool warranty section. [4]

Maintenance and care

Use the DCF845 manual as the reference for the 1/4 in hex chuck and 1 in bit tips. Check final tightening with a hand torque wrench where torque is specified; the manual does not treat the impact driver as a torque wrench. [2]

What else you’ll need

No accessory ASIN or replacement-part fit has been newly verified. No accessory buy link is guessed.

Budget and upgrade picks

No budget or upgrade ranking is made without comparable evidence. The Milwaukee 2953-20 has higher published maximum torque and a dedicated self-tapping screw mode in the linked comparison. That does not establish which driver is faster on your particular fastener. [3]

Is it better than the alternatives?

FAQ

Does DCF845B include a battery?

No. The linked listing is tool only: impact driver and belt hook, with no battery or charger. [1]

What does Precision Drive do?

The manual describes a pause as the screw head reaches the work, then slow impacts if needed. DeWalt names cabinet hinge screws and machine screws as uses. [2]

Can it replace a torque wrench?

No. DeWalt says to check a specified torque with a hand torque wrench. [2]

Can I fit regular round-shank drill bits?

No. The manual specifies 1/4 in hex accessories and 1 in bit tips. [2]

Sources

Gaps to resolve before upload

As an Amazon Associate I earn from qualifying purchases. Links on this page are Amazon affiliate links; buying through them doesn’t change what you pay.

By Mike E. · Updated November 7, 2026 · Based on existing manufacturer specs and source checks. Not tested hands-on.

More official buyer questions: DCF845 FAQ. Also: a first cordless kit for the shop.

Related comparison: DeWalt DCF845 vs DCF860.