ShopwoodPlans

Finish nailers · Single-tool guide

Milwaukee 3020-20 M18 FUEL 16-gauge finish nailer

Quick verdict

The 3020-20 is Milwaukee’s bare-tool M18 FUEL 16-gauge straight finish nailer. Milwaukee lists 1 to 2-1/2 in. 16-gauge straight (0°) nails, sequential and contact firing, a 110-nail magazine, and a nitrogen air-spring drive with no gas cartridge or compressor. The tool-only weight is 6.2 lb, and Milwaukee’s standard US power-tool warranty is 5 years. This is a specification-based guide, not a hands-on test. It is not the 18-gauge M18 FUEL brad nailer (2746-20).

Good fit

Milwaukee M18 FUEL 3020-20 16-gauge straight finish nailer, side view with the Milwaukee FUEL logo facing out, shown without a battery
Shown without a battery. Photo: shopwoodplans.com

Get it if

  • You already use M18 batteries and want a cordless 16-gauge straight finish nailer. The 3020-20 is sold as a bare tool. [1]
  • You need 1 to 2-1/2 in. 16-gauge straight (0°) finish nails, without a compressor, hose or gas cartridge. [1]
  • You want sequential and contact modes, plus tool-free depth adjustment and jam clearing. [1]

Look elsewhere

Skip it if

  • You need 18-gauge brads. That’s Milwaukee’s M18 FUEL 2746-20 brad nailer, not this 16-gauge finish nailer.
  • You want a kit with a battery and charger in the box. Official US pages list only the bare 3020-20. [1]
  • You need angled 16-gauge collation. This tool is a 0° straight finish nailer. [2]

As an Amazon Associate I earn from qualifying purchases. Links on this page are Amazon affiliate links; buying through them doesn’t change what you pay.

Key specs

These figures come from Milwaukee’s US product page, the 3020-20 operator’s manual, and Milwaukee’s July 2023 press release. Fire rate and nails-per-charge figures are manufacturer claims, subject to Milwaukee’s conditions.

Official US modelM18 FUEL 16 Gauge Straight Finish Nailer (3020-20), bare tool only
Nail gauge and collation16-gauge straight, 0° collation angle
Nail length1 in. to 2-1/2 in. (2.5 in.)
Magazine capacity110 nails
Firing modesSequential and contact actuation
Depth adjustmentTool-free
Jam clearingTool-free jam-clearing latch
DriveNitrogen air-spring mechanism; no gas cartridge
Fire rate3 nails per second (Milwaukee claim)
Nails per chargeUp to 700 on an M18 REDLITHIUM CP2.0 battery (Milwaukee claim)
Weight, tool only6.2 lb
Size, tool only12.9 in. L × 5 in. W × 11.7 in. H
Power sourceM18; compatible with all M18 REDLITHIUM batteries. Battery and charger sold separately.
Other featuresLED work light, reversible belt hook, tip storage on the magazine, dry-fire lockout / reload indicator
What’s in the box(1) M18 FUEL 16 Gauge Straight Finish Nailer (3020-20)
US warranty5-year limited warranty on the power tool; batteries have a separate warranty
Nameplate on the Milwaukee 3020-20, showing catalog number 3020-20, 16-gauge straight finish nails, 1 inch to 2-1/2 inch length, and a 0 degree collation angle
The nameplate lists 16-gauge straight nails, 1 in. to 2-1/2 in., and a 0° collation angle. Photo: shopwoodplans.com

Who it’s for, who should skip

Who it’s for

  • Users who need cordless 16-gauge straight finish nailing in the 1 to 2-1/2 in. range, and already have (or will supply) M18 batteries.
  • Jobs where a compressor, hose or gas cartridge would get in the way. Milwaukee describes a nitrogen air-spring drive with zero ramp-up and a compact design for tighter spaces.
  • Buyers who want both sequential and contact firing, tool-free depth adjustment and jam clearing, a 110-nail magazine, an LED work light, a reversible belt hook and tip storage on the magazine.

Who should skip it

  • Anyone who needs 18-gauge brads rather than 16-gauge finish nails. See the Milwaukee vs DeWalt brad nailer comparison for the 2746-20.
  • Anyone who wants a factory kit with a battery and charger. Official US pages list only the bare 3020-20; retailer tool-plus-battery bundles are not official Milwaukee kits.
  • Anyone who needs an angled 16-gauge nailer. This model is a 0° straight finish nailer.

Firing modes, depth and jams

The operator’s manual describes two actuation modes, switched by pressing and holding the MODE button. [2]

Mode and power controls on the Milwaukee 3020-20, including the MODE button used to switch between sequential and contact actuation
The MODE button sits on the back of the tool, with the power switch below it. Photo: shopwoodplans.com

Depth adjustment is tool-free. The manual says to drive a test fastener, remove the battery, then turn the depth selector left or right to increase or decrease drive depth, and repeat as needed.

Jam clearing is also tool-free. Remove the battery and fastener strip, pull down on the jam latch and pull it away from the tool, remove the fastener or debris (needle-nose pliers if needed), then close the latch.

Reload indicator: when about 4 to 5 nails remain, the workpiece contact will not compress. Milwaukee also lists dry-fire lockout as a feature.

Warranty and claims

Length: 5-year limited warranty on the power tool, from Milwaukee’s standard US warranty for electric power tools. The 3020-20 is not on Milwaukee’s shorter-term exception list (some framing nailers and the M12 23-gauge pin nailer are listed at 3 years). Batteries carry a separate warranty. [4]

Who’s covered: Milwaukee warrants the tool to the original purchaser from an authorized Milwaukee distributor, for defects in material and workmanship. Return to a Milwaukee factory Service Center or authorized service station is required, freight prepaid and insured, with proof of purchase.

Registration: not required. If no proof of purchase is provided, Milwaukee uses the manufacturing date to set the warranty period.

Not covered: misuse, alterations, abuse, accidents, lack of maintenance, unauthorized repairs, and normal wear. Wear parts Milwaukee lists include driver blades, pistons, strikers, bumpers, o-rings and seals.

What else you’ll need

Is it better than the alternatives?

This page covers the 16-gauge straight finish nailer only. If you need 18-gauge brads in the 5/8 to 2-1/8 in. range, that’s a different tool: the M18 FUEL 2746-20, compared with DeWalt’s DCN680B on the Milwaukee vs DeWalt brad nailer page.

Official Milwaukee US material describes the 3020-20 as a redesigned, more compact latest-generation tool with a precision tip. It does not use a “Gen II” label. No official US kit SKU (such as 3020-21) appears on Milwaukee’s product page.

FAQ

What nails does the Milwaukee 3020-20 take?

16-gauge straight (0° collation) finish nails, 1 in. to 2-1/2 in. Milwaukee says it is compatible with all 1 to 2-1/2 in. 16-gauge straight finish nails. Use only the size, length, collation angle and head type indicated on the nameplate.

How do sequential and contact modes differ?

In single sequential mode, the workpiece contact and then the trigger must be activated in that order. In contact (bump) mode, they can be activated in any sequence, including holding the trigger and bumping the contact. Toggle by pressing and holding the MODE button, per the operator’s manual.

How many nails does the magazine hold, and how do you reload?

110 nails. Load by sliding the fastener strip into the nail slot (points down), then advance the pusher. When about 4 to 5 nails remain, the workpiece contact will not compress.

Are a battery and charger included with the 3020-20?

No. Official US pages list only the bare 3020-20. The battery and charger are sold separately. Milwaukee does not list an official US kit SKU for this model.

What does “no gas cartridge” or nitrogen air-spring mean?

The tool uses a nitrogen air-spring mechanism, plus Milwaukee’s POWERSTATE brushless motor and REDLINK PLUS intelligence. Milwaukee describes a pneumatic-like response with zero ramp-up, and says it is fully battery-operated: no gas cartridges, no compressor and no hose.

How many nails per charge, and on which battery?

Milwaukee claims up to 700 nails per charge on an M18 REDLITHIUM CP2.0 battery. The tool is compatible with all M18 REDLITHIUM batteries. That figure is a manufacturer claim under Milwaukee’s conditions.

What is the official warranty?

5-year limited warranty on the power tool, for defects in material and workmanship, to the original purchaser from an authorized Milwaukee distributor. Batteries have a separate warranty. Normal wear parts such as driver blades, pistons, strikers and bumpers are excluded.

Is the 3020-20 the same as Milwaukee’s M18 FUEL brad nailer?

No. The 3020-20 is the 16-gauge straight finish nailer. The M18 FUEL 18-gauge brad nailer is the 2746-20, covered on the Milwaukee vs DeWalt brad nailer page.

Sources

Milwaukee M18 FUEL 3020-20 16-gauge finish nailer

As an Amazon Associate I earn from qualifying purchases. Links on this page are Amazon affiliate links; buying through them doesn’t change what you pay.

By Mike E. · Updated November 17, 2026 · Based on manufacturer specs, the operator’s manual and Milwaukee’s warranty page. Not tested hands-on.

Related comparison: Milwaukee 2746-20 vs 3020-20.