The short answer
18-gauge brads, 5/8–2-1/8 in? 2746-20
16-gauge straight finish nails, 1–2.5 in? 3020-20
These are different nailers on the same M18 FUEL platform, not two versions of one tool. Both are cordless bare tools with a 110-nail magazine, sequential and contact actuation, a POWERSTATE brushless motor, and a 5-year limited tool warranty. The 2746-20 is an 18-gauge brad nailer for 5/8–2-1/8 in fasteners. The 3020-20 is a 16-gauge straight finish nailer for 1–2.5 in nails. Milwaukee claims the 3020 can fire 3 nails per second and 700 nails per charge on an M18 CP2.0 battery. Official ONE-KEY Enabled: No on the 3020-20. I have not tested either tool.
Best for 18-gauge brads

Pick the 2746-20 if
- You need an 18-gauge brad nailer for official fastener lengths of 5/8–2-1/8 in (16–54 mm).
- You want sequential and contact actuation on a compact M18 FUEL brad nailer.
- You already live on M18 batteries and want the 5-year limited tool warranty.
Bare tool 2746-20. Battery and charger sold separately.
Check the Milwaukee 2746-20 on AmazonBest for 16-gauge finish nails

Pick the 3020-20 if
- You need 16-gauge straight finish nails from 1 to 2-1/2 in.
- You want Milwaukee’s official claims of 3 nails per second and 700 nails per charge on an M18 CP2.0 (those are Milwaukee figures, not a test).
- You want official “weight excluding battery” of 6.2 lb and a listed tip-storage feature on the magazine.
Bare tool 3020-20. Battery and charger sold separately. Official page: ONE-KEY Enabled: No.
Check the Milwaukee 3020-20 on AmazonBefore you buy: I compared the two bare tools (no battery or charger). Milwaukee’s 5-year limited warranty applies to the original purchaser from an authorized Milwaukee distributor. Check the seller before you order.
As an Amazon Associate I earn from qualifying purchases.
Key specs
spec rows won
spec rows won
not scored
These tools do different jobs (18-gauge brads vs 16-gauge finish nails), so I am not scoring gauge or nail length as a win. Fire-rate and nails-per-charge are official 3020 claims only; they are not scored against a missing 2746 figure. Weight is not scored, because only the 3020 lists a weight excluding battery.
A green check would mean that number is clearly better. Every figure comes from Milwaukee’s US product page or the official operator’s manual, not from Amazon.
| 2746-20 | 3020-20 | |
|---|---|---|
| Official name | M18 FUEL 18 Gauge Brad Nailer | M18 FUEL 16 Gauge Straight Finish Nailer |
| Fastener | 18 ga / 1.2 mm brads, 0° collation | 16 ga / 1.6 mm straight finish nails, 0° collation |
| Official fastener length | 5/8–2-1/8 in (16–54 mm) | 1–2.5 in (25–63.5 mm) |
| Magazine | 110 nails | 110 nails |
| Firing modes | Sequential and contact actuation (integrated trigger) | Sequential and contact actuation |
| Fire rate / nails per charge | Not listed on the official US page or manual checked today | Milwaukee claims 3 nails/sec and 700 nails per charge on an M18 CP2.0 |
| Weight | 5.35 lb (not labeled excluding battery) | 6.2 lb, listed as weight excluding battery |
| Assembled size (official) | 11.9 × 10.2 × 3.3 in | 12.9 × 11.7 × 5 in |
| ONE-KEY | Not claimed on the official 2746-20 sources used here | Official: ONE-KEY Enabled: No |
| US tool warranty | 5-year limited | 5-year limited |
Spec notes
- 2746 weight: The official 2746-20 row is 5.35 lb. It is not labeled “excluding battery.” Do not treat it as a confirmed bare-tool weight. A 6.3 lb / 11.1 in block also appears in the same Milwaukee page payload and belongs to another SKU; this page uses the 2746-20 row only.
- 3020 fire-rate claims: 3 nails per second and 700 nails per charge on a CP2.0 are Milwaukee product-page claims, not a test result.
- Nameplates: City Mill photos match Cat. No. 2746-20 (5/8”–2-1/8”) and Cat. No. 3020-20 (16GA, 0°, 1”–2-1/2”).
What it can handle
These jobs are checked only against official Milwaukee fastener ranges and the 3020’s official hardwood/softwood wording. I have not tested either tool.
- Can do Inside the maker’s listed limits
- Check the manual Official wording is qualified, or a figure is missing
- Can’t confirm Not something Milwaukee lists for that model in the sources used here
| Job | 2746-20 | 3020-20 |
|---|---|---|
| Fasteners | ||
| 18-gauge brads up to 2-1/8 in | Can doOfficial manual: 18 ga, 5/8–2-1/8 in, 110-nail magazine. | Can’t confirmThis is a 16-gauge straight finish nailer, not an 18-gauge brad nailer. |
| 16-gauge straight finish nails up to 2.5 in | Can’t confirmOfficial range stops at 18-gauge brads to 2-1/8 in. | Can doOfficial page and manual: 16 ga straight, 1–2.5 in. |
| Hardwood and softwood finish work | Check the manualOfficial page talks about clean, consistent nail holes; it does not spell out hardwood vs softwood the way the 3020 page does. | Can doOfficial page: power to nail hardwoods and softwoods. |
| Contact or sequential firing | Can doOfficial: sequential and contact actuation. | Can doOfficial: sequential and contact actuation. |
Who should buy which
Pick the 2746-20 when the job is 18-gauge brads in the official 5/8–2-1/8 in range. Pick the 3020-20 when you need 16-gauge straight finish nails up to 2.5 in, and you want Milwaukee’s published fire-rate and nails-per-charge claims. If you already own M18 batteries, either bare tool drops in. These are not substitutes for each other, and neither is a pneumatic nailer.
Skip it if
- You need a DeWalt 20V brad nailer instead. See Milwaukee vs DeWalt brad nailer.
- You need ONE-KEY tracking on the 3020-20. The official US page says ONE-KEY Enabled: No.
- You need a published nails-per-charge figure for the 2746-20. Milwaukee does not list one on the official page or manual checked today.
Questions about this pair
Are these the same tool in two gauges?
No. Both are M18 FUEL cordless nailers with a 110-nail magazine, sequential and contact modes, and a 5-year limited tool warranty. The 2746-20 is 18-gauge, 5/8–2-1/8 in. The 3020-20 is 16-gauge straight, 1–2.5 in.
Does the 3020-20 have ONE-KEY?
No. The official US product page lists ONE-KEY Enabled: No.
How much do they weigh?
Official 2746-20 weight is 5.35 lb, not labeled excluding battery. Official 3020-20 weight is 6.2 lb, listed as excluding battery. Those labels are not the same measurement.
How many nails does the 3020 fire per charge?
Milwaukee claims 700 nails per charge on an M18 CP2.0, and 3 nails per second. Those are maker claims, not a test on this site. The 2746 official page and manual checked today do not list a nails-per-charge figure.
Is a battery included?
No. Both official US pages are bare tools (number of batteries included: 0 on the 3020 page). Budget for an M18 battery and charger if you are starting the platform.
What is the warranty, and does Amazon count?
Milwaukee lists a 5-year limited tool warranty on both. It applies to the original purchaser from an authorized Milwaukee distributor. Batteries are a separate warranty. Check who the Amazon seller is before you order.
Which ASINs?
2746-20 is B0B9FJTDSC and 3020-20 is B0DDJ57P8B, both live as of the November 19, 2026 demand check. An alternate 2746 listing also exists; this page uses B0B9FJTDSC, the ASIN already used on live shopwoodplans pages.
Sources
- Milwaukee 2746-20 US product page: milwaukeetool.com 2746-20 (checked Nov 19, 2026).
- Milwaukee 3020-20 US product page: milwaukeetool.com 3020-20 (checked Nov 19, 2026).
- 2746-20 operator’s manual: 58-14-0142d2.pdf.
- 3020-20 operator’s manual: 58-14-0763d1.pdf.
- Milwaukee registration and warranty page (existing site language): 5-year limited on the power tool to the original purchaser from an authorized Milwaukee distributor.